Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Vêtements de salle blanche, EPI et consommables
Cleanroom couverture
A full-body cleanroom coverall designed to reduce contamination transfer from personnel while supporting comfortable movement during controlled-environment operations.
- Continuous full-body coverage for controlled gowning
- Low-lint fabric and enclosed seam configurations
- Selectable cuff, ankle, hood and footwear interfaces
Introduction de produit
The Cleanroom Coverall provides continuous torso, arm and leg coverage with enclosed seams and a front closure suited to controlled dressing procedures. Reusable versions can use lightweight continuous-filament polyester fabric, while disposable configurations can be specified in low-lint nonwoven material. Cuff style, ankle finish, hood interface and boot compatibility can be selected for the intended cleanroom protocol.
Key Features
Front zipper protected by a cover flap to limit exposed closure surfaces
Elasticated or knitted cuffs available for glove and footwear interfaces
Raglan-style or articulated sleeves support routine operator movement
Reusable and disposable material configurations available
Préoccupations du client produit
A coverall can only support contamination control when its coverage, movement allowance and glove or footwear interfaces work as one gowning system. Material and construction also need to suit whether the facility uses controlled laundering or a single-use replacement protocol.
Personnel movement can release fibers and skin particles into the controlled area.Select a low-lint continuous-filament or cleanroom-compatible nonwoven construction matched to the contamination-control plan.
Poor cuff and ankle interfaces may leave gaps between garments, gloves and footwear.Configure elasticated, knitted or thumb-loop cuffs and compatible ankle closures for the specified gowning system.
Heavy fabric or restrictive patterning can reduce comfort during long shifts.Use an ergonomic pattern with adequate torso ease and articulated sleeves for routine bending and reaching.
Garment laundering or sterilization processes may affect fit and service life.Match reusable fabric, seam construction and labeling to the validated laundering or sterilization workflow.
Les applications typiques
Suitable for semiconductor assembly, pharmaceutical production, biotechnology laboratories, medical-device manufacturing, optics processing and other controlled areas with defined gowning procedures.
Paramètres techniques
These ranges cover configurable reusable polyester and low-lint nonwoven coverall constructions. Final fabric, garment dimensions, seam finish and interface details should be selected for the intended gowning sequence and operator size range.
| Matériaux de base | Continuous-filament polyester cleanroom fabric or low-lint nonwoven material |
|---|---|
| Panneau épaisseur | 0.20–0.45 mm |
| Largeur effective | 500–760 mm per laid-flat garment section |
| Longueur maximale | 1950 mm |
| Acier face épaisseur | 0 mm; no steel facing used |
| Densité Core | 70–130 kg/m³ apparent fabric bulk density |
| Conductivité thermique | 0.035–0.060 W/(m·K), material dependent |
| surface finie | Smooth low-lint textile surface with enclosed or bound seams |
| Type joint | Sewn and bound seams with covered front zipper |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation. |
Options disponibles
Reusable polyester or disposable nonwoven constructionWhite, light blue or other standard cleanroom garment colorsElastic, knitted or thumb-loop wrist cuffsOpen ankle, elastic ankle or integrated boot configurationIntegrated or separate hood interfaceIndividual identification and size labeling
Planning a Cleanroom Coverall specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
