English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ملابس الغرف النظيفة، PPE والمواد الاستهلاكية
غرف نظيفة غطاء
A full-body cleanroom coverall designed to reduce contamination transfer from personnel while supporting comfortable movement during controlled-environment operations.
- Continuous full-body coverage for controlled gowning
- Low-lint fabric and enclosed seam configurations
- Selectable cuff, ankle, hood and footwear interfaces
مقدمة المنتج
The Cleanroom Coverall provides continuous torso, arm and leg coverage with enclosed seams and a front closure suited to controlled dressing procedures. Reusable versions can use lightweight continuous-filament polyester fabric, while disposable configurations can be specified in low-lint nonwoven material. Cuff style, ankle finish, hood interface and boot compatibility can be selected for the intended cleanroom protocol.
الخصائص الرئيسية
Front zipper protected by a cover flap to limit exposed closure surfaces
Elasticated or knitted cuffs available for glove and footwear interfaces
Raglan-style or articulated sleeves support routine operator movement
Reusable and disposable material configurations available
مخاوف المنتج للعملاء
A coverall can only support contamination control when its coverage, movement allowance and glove or footwear interfaces work as one gowning system. Material and construction also need to suit whether the facility uses controlled laundering or a single-use replacement protocol.
Personnel movement can release fibers and skin particles into the controlled area.Select a low-lint continuous-filament or cleanroom-compatible nonwoven construction matched to the contamination-control plan.
Poor cuff and ankle interfaces may leave gaps between garments, gloves and footwear.Configure elasticated, knitted or thumb-loop cuffs and compatible ankle closures for the specified gowning system.
Heavy fabric or restrictive patterning can reduce comfort during long shifts.Use an ergonomic pattern with adequate torso ease and articulated sleeves for routine bending and reaching.
Garment laundering or sterilization processes may affect fit and service life.Match reusable fabric, seam construction and labeling to the validated laundering or sterilization workflow.
تطبيقات نموذجية
Suitable for semiconductor assembly, pharmaceutical production, biotechnology laboratories, medical-device manufacturing, optics processing and other controlled areas with defined gowning procedures.
المعلمات الفنية
These ranges cover configurable reusable polyester and low-lint nonwoven coverall constructions. Final fabric, garment dimensions, seam finish and interface details should be selected for the intended gowning sequence and operator size range.
| المواد الأساسية | Continuous-filament polyester cleanroom fabric or low-lint nonwoven material |
|---|---|
| سمك اللوحة | 0.20–0.45 mm |
| العرض الفعال | 500–760 mm per laid-flat garment section |
| الحد الأقصى الطول | 1950 mm |
| الصلب يواجه سمك | 0 mm; no steel facing used |
| الكثافة الأساسية | 70–130 kg/m³ apparent fabric bulk density |
| الموصلية الحرارية | 0.035–0.060 W/(m·K), material dependent |
| إنهاء السطح | Smooth low-lint textile surface with enclosed or bound seams |
| نوع المشترك | Sewn and bound seams with covered front zipper |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Reusable polyester or disposable nonwoven constructionWhite, light blue or other standard cleanroom garment colorsElastic, knitted or thumb-loop wrist cuffsOpen ankle, elastic ankle or integrated boot configurationIntegrated or separate hood interfaceIndividual identification and size labeling
Planning a Cleanroom Coverall specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
