Peralatan Dekontaminasi Personil dan Bahan

Single-Person Cleanroom Air Shower

A compact, interlocked chamber that removes loose particles from one gowned operator with directional recirculated filtered air before clean-side access.

One-Person Footprint
Directional Garment Jets
Interlocked Door Sequence
Low-Level Particle Return

Permintaan untuk kutipan Browse Produk

Perkenalan produk

This cleanroom air shower provides a controlled transition between a gowning room and a clean area. After entry, the door sequence holds the passage closed while sidewall nozzles direct filtered air across the operator; released lint is collected through lower return grilles before the air is recirculated. Its compact straight-through layout is intended for single-file personnel traffic where entrance space is limited.

Fitur utama:

A narrow internal passage gives one fully gowned operator working clearance without enlarging the entrance footprint.

Adjustable nozzle rows can be aimed at sleeves, torso and lower garments.

Lower return grilles draw released particles downward rather than allowing them to settle on footwear.

A timed controller coordinates the cleaning period and the door-release sequence.

Smooth internal panels allow routine wipe-down of the occupied chamber surfaces.

Kekhawatiran produk pelanggan

A single-occupant entry needs repeatable garment cleaning without consuming valuable gowning-room space or creating confusing door operation.

Sleeves and trouser legs receive little cleaning when air is supplied at one height.Multi-level adjustable sidewall nozzles can cover upper and lower garment areas.

Premature clean-side opening can disturb the controlled boundary.The interlock keeps the exit secured until the programmed cycle has ended.

A large entrance unit crowds a compact gowning room.The blower, filtration path and returns are integrated within a slim self-contained enclosure.

Released particles can circulate around the operator.Low-wall return openings collect the particle-laden airflow close to the floor.

Aplikasi yang Tipis

Pharmaceutical gowning entrancesRuang perakitan peralatan medisElectronics cleanroom transitionsLaboratory controlled-area access

Parameter teknis

Typical construction ranges for a compact one-person air shower are listed below.

Bahan inti	Polyurethane-insulated powder-coated steel enclosure with stainless nozzle plates, prefilter and H13 HEPA recirculation stage
Ketebalan Panel (Panel Thickness)	50 mm insulated enclosure panels
Efektif lebar	800-900 mm clear internal passage width
Panjang maksimum	Up to 1200 mm chamber length
Baja menghadap ketebalan	1.0-1.2 mm formed steel sheet
Kepadatan inti (core density)	38-45 kg/m³ closed-cell polyurethane insulation
Konduktivitas Termal (Thermal Conductivity)	0.022-0.028 W/(m·K) for the insulated panel core
Permukaan selesai	White epoxy-polyester powder coating with smooth sealed inner surfaces
Jenis Bersama	Gasketed panel seams with electromagnetically interlocked entrance and exit door frames
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

SUS 304 internal liner12-18 directional nozzlesProgrammable cleaning cycleLeft-hand or right-hand door swing

Planning a Single-Person Cleanroom Air Shower specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami