Three-quarter view of deep V-bank HEPA filter with multiple mini-pleat packs

Filter udara dan filtrasi kimia

Filter HEPA V-Bank

A compact high-airflow HEPA filter that arranges multiple mini-pleat packs in a V pattern to provide greater media area within a standard air-handling footprint.

Area Media Tinggi
Compact V-Bank Geometry
Low Initial Resistance
Gasket atau Gel Seal

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The V-bank HEPA filter combines several glass-microfibre mini-pleat packs inside a rigid deep frame. Angling the packs creates substantially more effective filter area than a flat panel of the same face size, allowing higher airflow while controlling resistance. Continuous polyurethane potting secures each pack to the frame, and molded separators hold the pleat channels open under operating pressure. A perimeter gasket or downstream gel channel provides the selected sealing interface for supply-air housings, cleanroom air handlers and high-volume terminal modules.

Fitur utama:

Multiple V-shaped mini-pleat packs place a large amount of filter media behind one standard face opening.

Rigid ABS or galvanized-steel construction resists racking during transport, clamping and high-volume operation.

Hot-melt pleat separators maintain uniform air channels and reduce localized media loading.

Continuous pack potting and a closed-cell gasket or gel channel support a controlled perimeter seal.

Kekhawatiran produk pelanggan

High-volume cleanroom systems need HEPA efficiency without consuming excessive fan energy or requiring an oversized filter bank.

A flat HEPA panel produces excessive resistance at the required design airflow.The V-bank arrangement increases media area so the same face opening can carry more air at a lower media velocity.

Pleat channels collapse or become uneven under high system pressure.Closely spaced hot-melt separators stabilize the mini-pleat geometry across every media pack.

Small frame distortions create bypass around the filter perimeter.A rigid deep frame and continuous gasket or gel interface distribute clamping pressure around all four sides.

Frequent filter changes disrupt a high-demand air-handling unit.The expanded media area distributes particulate loading over a larger surface and supports longer useful intervals.

Aplikasi yang Tipis

High-airflow cleanroom air-handling unitsPharmaceutical supply-air final filtrationBiotechnology production ventilationHospital critical-area HVAC systemsMicroelectronics make-up air units

Parameter teknis

Representative construction and dimensional ranges for compact V-bank HEPA filters are listed below.

Bahan inti	Water-resistant glass-microfibre HEPA media in thermoplastic-supported mini-pleat V packs
Ketebalan Panel (Panel Thickness)	292–305 mm overall filter depth
Efektif lebar	287 - 610 mm lebar wajah nominal
Panjang maksimum	Hingga 610 mm nominal tinggi wajah
Baja menghadap ketebalan	0.5–0.8 mm galvanized-steel header or protective faceguard when specified
Kepadatan inti (core density)	Approximately 35–55 kg/m³ equivalent packed-media density
Konduktivitas Termal (Thermal Conductivity)	Approximately 0.035–0.045 W/(m·K) for the dry glass-fibre media pack
Permukaan selesai	Smooth ABS frame or corrosion-resistant galvanized-steel frame with optional coated finish
Jenis Bersama	Continuous closed-cell gasket, reverse gasket or fluid-gel perimeter seal
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

H13 or H14 efficiency classABS, galvanized-steel or stainless-steel frameUpstream or downstream gasket arrangementPolyurethane gel channel for knife-edge housings

Planning a V-Bank HEPA Filter specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami