Pemasok One-Stop Anda untuk Peralatan Cleanroom dan Fasilitas Aseptik EsensialDukungan proyek internasional
ST STSTjh CleanroomOpen mobile navigationClose mobile navigation
Peralatan Dekontaminasi Personil dan Bahan

Cargo Cleanroom Air Shower

A reinforced material-transfer air shower that removes loose surface dust from carts, palletised loads and production equipment before clean-area entry.
  • Wide Cargo Passage
  • Side and Top Cleaning
  • Flush Wheeled Route
  • Heavy-Duty Returns
Permintaan untuk kutipan Browse Produk

Perkenalan produk

The cargo air shower is sized around material handling rather than a stationary operator. Sidewall jets, and optional roof jets, direct filtered air across trolley frames, cartons and equipment surfaces. A level reinforced floor supports wheeled transfer, while guarded low-level returns and larger prefilters accommodate the heavier fibres and warehouse dust commonly carried by incoming materials.

Fitur utama:

A broad, flush passage accommodates carts and pallet jacks without projecting floor rails.

Side and roof nozzle zones can clean vertical faces and upper load surfaces.

Lower impact protection guards returns from routine trolley contact.

Large-area prefilters are suited to coarse packaging fibres.

Large interlocked doors preserve the transfer boundary during the cleaning cycle.

Kekhawatiran produk pelanggan

Material loads vary in height, shape and wheel loading, so the chamber must clean exposed surfaces without obstructing the transfer route.

Tall loads leave their upper surfaces outside sidewall airflow.Optional roof nozzles direct filtered air downward across load tops.
Raised thresholds impede pallet-jack movement.A flush reinforced floor maintains a smooth wheeled path.
Cart impacts damage exposed return grilles.Kick plates and protected inlet faces shield the low-level return sections.
Packaging debris clogs small personnel-air-shower filters.Expanded washable prefilter banks offer greater coarse-dust collection area.

Aplikasi yang Tipis

Pharmaceutical material transferFood ingredient cart entryElectronics equipment move-inPackaging component decontamination

Parameter teknis

Typical structural ranges for a cart and equipment cargo air shower are given below.

Bahan intiReinforced mineral-wool insulated steel enclosure with multi-side nozzle plenums, washable prefilters and H13 HEPA banks
Ketebalan Panel (Panel Thickness)50-75 mm impact-reinforced wall and roof panels
Efektif lebar1500-2500 mm clear cargo passage width
Panjang maksimumUp to 6000 mm modular cargo cleaning length
Baja menghadap ketebalan1.2-1.5 mm steel facing with heavier stainless kick plates
Kepadatan inti (core density)80-120 kg/m³ mineral-wool enclosure core
Konduktivitas Termal (Thermal Conductivity)0.036-0.045 W/(m·K) for the mineral-wool panel construction
Permukaan selesaiPowder-coated upper panels with brushed stainless lower impact protection
Jenis BersamaBolted heavy-duty modular frame with flush floor joints and electrically interlocked cargo doors
Customization (Kustomisasi)Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Swing, sliding or roll-up cargo doorsSide-plus-ceiling nozzle arrangementWheel guides and bumper railsPallet-jack or powered-cart clearances

Planning a Cargo Cleanroom Air Shower specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami
Email Kami WhatsApp WhatsApp WhatsApp WhatsApp WeChat adalah

Beranda

Produk

Berita

Tentang Kami

Hubungi Kami