English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات إزالة التلوث للموظفين والمواد
ثلاثة الأبواب غرف نظيفة الهواء دش
A branched personnel air shower with three controlled doorways, allowing one gowning entrance to serve two clean-area routes.
- Three Controlled Doorways
- Branched Personnel Routing
- Selectable Clean-Side Exit
- Shared Cleaning Zone
مقدمة المنتج
The three-door air shower introduces a third doorway to a common cleaning chamber. A sequenced controller keeps non-selected doors secured while the chosen route becomes available at the end of the cleaning cycle. This lets one gowning entrance serve two controlled zones or a T-shaped circulation plan without duplicating the whole shower enclosure.
الخصائص الرئيسية
Exit selection can be linked to the required destination path.
Centralised nozzle coverage serves the shared cleaning space.
Door-status feedback prevents conflicting release signals.
Separate emergency releases can be provided for safe egress.
مخاوف المنتج للعملاء
A third door offers routing flexibility, but it requires clear selection logic and careful redistribution of airflow around the opening-heavy chamber.
One gowning room must feed two clean production areas.Two selectable clean-side doors can be connected to separate controlled routes.
Operators may choose the wrong exit.Destination selection can enable only the permitted clean-side door after cleaning.
Three door signals conflict if handles are operated together.A sequenced controller checks all leaf positions and retains the non-selected locks.
The extra opening weakens air coverage on one side of the chamber.Ceiling outlets and relocated nozzle rows can cover the door-heavy layout.
تطبيقات نموذجية
Shared pharmaceutical gowning roomsLaboratory suites with two controlled wingsElectronics route separationCleanroom corridor junctions
المعلمات الفنية
Typical enclosure ranges for a three-door personnel air shower are shown below.
| المواد الأساسية | Insulated steel T-shaped chamber with H13 HEPA recirculation, ceiling and wall nozzles, and three monitored door assemblies |
|---|---|
| سمك اللوحة | 50-75 mm reinforced cleanroom enclosure panels |
| العرض الفعال | 900-1500 mm clear central chamber width |
| الحد الأقصى الطول | Up to 2500 mm primary route length |
| الصلب يواجه سمك | 1.0-1.5 mm formed facing with reinforced three-door jambs |
| الكثافة الأساسية | 50-80 kg/m³ insulated composite panel infill |
| الموصلية الحرارية | 0.030-0.041 W/(m·K) for the selected enclosure core |
| إنهاء السطح | White powder-coated body with contrasting door-status indicators |
| نوع المشترك | Sealed T-junction panels with three electronically sequenced door frames |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
T-shaped or offset arrangementDestination card-reader inputSwing or sliding clean-side doorsRoute status indicators
Planning a Three-Door Cleanroom Air Shower specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
