İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Personel ve Malzeme Dekontaminasyon Ekipmanları
Üç Kapı Temiz Oda Hava Duş
A branched personnel air shower with three controlled doorways, allowing one gowning entrance to serve two clean-area routes.
- Three Controlled Doorways
- Branched Personnel Routing
- Selectable Clean-Side Exit
- Shared Cleaning Zone
Ürün tanıtımı
The three-door air shower introduces a third doorway to a common cleaning chamber. A sequenced controller keeps non-selected doors secured while the chosen route becomes available at the end of the cleaning cycle. This lets one gowning entrance serve two controlled zones or a T-shaped circulation plan without duplicating the whole shower enclosure.
Ana Özellikler
Exit selection can be linked to the required destination path.
Centralised nozzle coverage serves the shared cleaning space.
Door-status feedback prevents conflicting release signals.
Separate emergency releases can be provided for safe egress.
Müşteri Ürün Sorunları
A third door offers routing flexibility, but it requires clear selection logic and careful redistribution of airflow around the opening-heavy chamber.
One gowning room must feed two clean production areas.Two selectable clean-side doors can be connected to separate controlled routes.
Operators may choose the wrong exit.Destination selection can enable only the permitted clean-side door after cleaning.
Three door signals conflict if handles are operated together.A sequenced controller checks all leaf positions and retains the non-selected locks.
The extra opening weakens air coverage on one side of the chamber.Ceiling outlets and relocated nozzle rows can cover the door-heavy layout.
Tipik uygulamalar
Shared pharmaceutical gowning roomsLaboratory suites with two controlled wingsElectronics route separationCleanroom corridor junctions
Teknik parametreler
Typical enclosure ranges for a three-door personnel air shower are shown below.
| Temel malzemeler | Insulated steel T-shaped chamber with H13 HEPA recirculation, ceiling and wall nozzles, and three monitored door assemblies |
|---|---|
| Panel kalınlığı | 50-75 mm reinforced cleanroom enclosure panels |
| Effective Width (Etkili Genişlik) | 900-1500 mm clear central chamber width |
| Maksimum uzunluk | Up to 2500 mm primary route length |
| Çelik yüz yüze kalınlığı | 1.0-1.5 mm formed facing with reinforced three-door jambs |
| Core Density (Çekirdek Yoğunluğu) | 50-80 kg/m³ insulated composite panel infill |
| Termal İletkenlik | 0.030-0.041 W/(m·K) for the selected enclosure core |
| Yüzey bitirme | White powder-coated body with contrasting door-status indicators |
| Ortak tip | Sealed T-junction panels with three electronically sequenced door frames |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
T-shaped or offset arrangementDestination card-reader inputSwing or sliding clean-side doorsRoute status indicators
Planning a Three-Door Cleanroom Air Shower specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
