Complete three-door cleanroom air shower with two visible exit doorways

Персонал и оборудование для дезактивации материалов

Трехдверный воздушный душ

A branched personnel air shower with three controlled doorways, allowing one gowning entrance to serve two clean-area routes.

Three Controlled Doorways
Branched Personnel Routing
Selectable Clean-Side Exit
Shared Cleaning Zone

Запрос котировки Просмотреть продукты

Введение продукции

The three-door air shower introduces a third doorway to a common cleaning chamber. A sequenced controller keeps non-selected doors secured while the chosen route becomes available at the end of the cleaning cycle. This lets one gowning entrance serve two controlled zones or a T-shaped circulation plan without duplicating the whole shower enclosure.

Основные характеристики

Three monitored door leaves support one-to-two routing.

Exit selection can be linked to the required destination path.

Centralised nozzle coverage serves the shared cleaning space.

Door-status feedback prevents conflicting release signals.

Separate emergency releases can be provided for safe egress.

Обеспокоенность клиентов продуктами

A third door offers routing flexibility, but it requires clear selection logic and careful redistribution of airflow around the opening-heavy chamber.

One gowning room must feed two clean production areas.Two selectable clean-side doors can be connected to separate controlled routes.

Operators may choose the wrong exit.Destination selection can enable only the permitted clean-side door after cleaning.

Three door signals conflict if handles are operated together.A sequenced controller checks all leaf positions and retains the non-selected locks.

The extra opening weakens air coverage on one side of the chamber.Ceiling outlets and relocated nozzle rows can cover the door-heavy layout.

Типичные приложения

Shared pharmaceutical gowning roomsLaboratory suites with two controlled wingsElectronics route separationCleanroom corridor junctions

Технические параметры

Typical enclosure ranges for a three-door personnel air shower are shown below.

Основной материал	Insulated steel T-shaped chamber with H13 HEPA recirculation, ceiling and wall nozzles, and three monitored door assemblies
Толщина панели	50-75 mm reinforced cleanroom enclosure panels
эффективная ширина	900-1500 mm clear central chamber width
Максимальная длина	Up to 2500 mm primary route length
Толщина линий стали	1.0-1.5 mm formed facing with reinforced three-door jambs
Плотность ядра	50-80 kg/m³ insulated composite panel infill
Теплопроводимость	0.030-0.041 W/(m·K) for the selected enclosure core
Поверхностная отделка	White powder-coated body with contrasting door-status indicators
Объединенный тип	Sealed T-junction panels with three electronically sequenced door frames
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

T-shaped or offset arrangementDestination card-reader inputSwing or sliding clean-side doorsRoute status indicators

Planning a Three-Door Cleanroom Air Shower specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой