Complete three-door cleanroom air shower with two visible exit doorways

인력 및 재료 오염 제거 장비

3 도어 클린룸 에어 샤워

A branched personnel air shower with three controlled doorways, allowing one gowning entrance to serve two clean-area routes.

Three Controlled Doorways
Branched Personnel Routing
Selectable Clean-Side Exit
Shared Cleaning Zone

견적 요청 제품 찾아보기

상품 소개

The three-door air shower introduces a third doorway to a common cleaning chamber. A sequenced controller keeps non-selected doors secured while the chosen route becomes available at the end of the cleaning cycle. This lets one gowning entrance serve two controlled zones or a T-shaped circulation plan without duplicating the whole shower enclosure.

주요 기능

Three monitored door leaves support one-to-two routing.

Exit selection can be linked to the required destination path.

Centralised nozzle coverage serves the shared cleaning space.

Door-status feedback prevents conflicting release signals.

Separate emergency releases can be provided for safe egress.

고객 제품 관심사

A third door offers routing flexibility, but it requires clear selection logic and careful redistribution of airflow around the opening-heavy chamber.

One gowning room must feed two clean production areas.Two selectable clean-side doors can be connected to separate controlled routes.

Operators may choose the wrong exit.Destination selection can enable only the permitted clean-side door after cleaning.

Three door signals conflict if handles are operated together.A sequenced controller checks all leaf positions and retains the non-selected locks.

The extra opening weakens air coverage on one side of the chamber.Ceiling outlets and relocated nozzle rows can cover the door-heavy layout.

일반적인 응용 프로그램

Shared pharmaceutical gowning roomsLaboratory suites with two controlled wingsElectronics route separationCleanroom corridor junctions

기술 매개변수

Typical enclosure ranges for a three-door personnel air shower are shown below.

핵심 재료	Insulated steel T-shaped chamber with H13 HEPA recirculation, ceiling and wall nozzles, and three monitored door assemblies
패널 두께	50-75 mm reinforced cleanroom enclosure panels
유효 폭	900-1500 mm clear central chamber width
최대 길이	Up to 2500 mm primary route length
강철 면면 두께	1.0-1.5 mm formed facing with reinforced three-door jambs
코어 밀도	50-80 kg/m³ insulated composite panel infill
열전도도 (Thermal Conductivity)	0.030-0.041 W/(m·K) for the selected enclosure core
표면 마무리	White powder-coated body with contrasting door-status indicators
접합 유형	Sealed T-junction panels with three electronically sequenced door frames
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

T-shaped or offset arrangementDestination card-reader inputSwing or sliding clean-side doorsRoute status indicators

Planning a Three-Door Cleanroom Air Shower specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.