Pembekal Satu Henti Anda untuk Peralatan Bilik Bersih dan Kemudahan AseptikSokongan Projek Antarabangsa
Open mobile navigationClose mobile navigation
Peralatan Dekontaminasi Kakitangan dan Bahan

Mandian Udara Bilik Bersih Tiga Pintu

A branched personnel air shower with three controlled doorways, allowing one gowning entrance to serve two clean-area routes.
  • Three Controlled Doorways
  • Branched Personnel Routing
  • Selectable Clean-Side Exit
  • Shared Cleaning Zone
Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The three-door air shower introduces a third doorway to a common cleaning chamber. A sequenced controller keeps non-selected doors secured while the chosen route becomes available at the end of the cleaning cycle. This lets one gowning entrance serve two controlled zones or a T-shaped circulation plan without duplicating the whole shower enclosure.

Ciri-ciri Utama

Three monitored door leaves support one-to-two routing.

Exit selection can be linked to the required destination path.

Centralised nozzle coverage serves the shared cleaning space.

Door-status feedback prevents conflicting release signals.

Separate emergency releases can be provided for safe egress.

Kebimbangan Produk Pelanggan

A third door offers routing flexibility, but it requires clear selection logic and careful redistribution of airflow around the opening-heavy chamber.

One gowning room must feed two clean production areas.Two selectable clean-side doors can be connected to separate controlled routes.
Operators may choose the wrong exit.Destination selection can enable only the permitted clean-side door after cleaning.
Three door signals conflict if handles are operated together.A sequenced controller checks all leaf positions and retains the non-selected locks.
The extra opening weakens air coverage on one side of the chamber.Ceiling outlets and relocated nozzle rows can cover the door-heavy layout.

Permohonan yang biasa

Shared pharmaceutical gowning roomsLaboratory suites with two controlled wingsElectronics route separationCleanroom corridor junctions

Parameter teknikal

Typical enclosure ranges for a three-door personnel air shower are shown below.

Bahan TerasInsulated steel T-shaped chamber with H13 HEPA recirculation, ceiling and wall nozzles, and three monitored door assemblies
Ketebalan Panel50-75 mm reinforced cleanroom enclosure panels
Lebar berkesan900-1500 mm clear central chamber width
Panjang maksimumUp to 2500 mm primary route length
Keluli Menghadapi Ketebalan1.0-1.5 mm formed facing with reinforced three-door jambs
Ketumpatan teras50-80 kg/m³ insulated composite panel infill
Kekonduksian Terma0.030-0.041 W/(m·K) for the selected enclosure core
Kemasan permukaanWhite powder-coated body with contrasting door-status indicators
Jenis BersatuSealed T-junction panels with three electronically sequenced door frames
PenyesuaianBoleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

T-shaped or offset arrangementDestination card-reader inputSwing or sliding clean-side doorsRoute status indicators

Planning a Three-Door Cleanroom Air Shower specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami
Email Kami WhatsApp WeChat

Laman Utama

Produk

Berita

Tentang Kami

Hubungi Kami