English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أدوات اختبار الغرفة النظيفة والتحقق من صحتها
نظام رسم الخرائط درجة الحرارة
A portable multi-channel data acquisition system for synchronized wired temperature mapping in sterilizers, chambers, freezers and other controlled thermal equipment.
- Synchronized multi-point mapping.
- Modular wired sensor inputs.
- Stand-alone touch operation.
مقدمة المنتج
This compact mapping platform combines a rugged measurement mainframe, a local touch interface and removable thermocouple input modules in one transportable enclosure. Multiple sensors are sampled against a common clock so engineers can compare temperature distribution across a chamber or load throughout the same study. Internal storage preserves the run locally, while network and USB interfaces support study transfer and analysis without tying the instrument to a general-purpose computer during collection.
الخصائص الرئيسية
Removable input modules simplify sensor replacement and configuration changes.
Local touch controls support stand-alone study setup and live review.
Cold-junction compensation stabilizes thermocouple measurements at the input bank.
Internal memory safeguards complete mapping records if the network is unavailable.
Battery-backed operation helps a study continue through brief supply interruptions.
مخاوف المنتج للعملاء
Thermal equipment can meet a controller setpoint while still containing local hot or cold zones, so qualification requires simultaneous measurements distributed throughout the usable volume or process load.
Independent spot readings cannot show how the whole chamber behaves at the same moment.Common-clock channel scanning produces time-aligned measurements from every mapped location.
A sensor fault can invalidate a long qualification run.Live channel status and removable input modules help identify an open or unstable sensor before the study proceeds.
Network loss may interrupt data collection in remote equipment areas.Stand-alone controls and internal memory keep the acquisition task local to the instrument.
Different assets require different channel counts and sensor types.Modular inputs and selectable thermocouple configurations adapt the platform to each mapping plan.
تطبيقات نموذجية
Steam sterilizer temperature mappingDry-heat oven and depyrogenation studiesStability chamber qualificationRefrigerator and freezer distribution studiesLyophilizer shelf and chamber mapping
المعلمات الفنية
Representative portable mapping-system construction is listed below; channel count, thermocouple type and communication accessories can be selected for the intended study.
| المواد الأساسية | Powder-coated aluminum chassis, polycarbonate control bezel, measurement electronics and removable thermocouple input modules |
|---|---|
| سمك اللوحة | Typically 1.5-2.0 mm for aluminum enclosure panels |
| العرض الفعال | Approximately 300-420 mm across the portable mainframe |
| الحد الأقصى الطول | Approximately 350-480 mm including the folded transport-handle profile |
| الصلب يواجه سمك | Typically 0.8-1.2 mm for internal shielding and module-retaining plates |
| الكثافة الأساسية | Approximately 2700 kg/m³ for the aluminum chassis |
| الموصلية الحرارية | Approximately 167-205 W/(m·K) for the aluminum chassis |
| إنهاء السطح | Off-white powder-coated enclosure with dark-navy molded bezel and orange sensor-port identifiers |
| نوع المشترك | Keyed removable multi-channel input modules with thermocouple terminals plus USB and Ethernet data interfaces |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Type T thermocouple modulesType J or K thermocouple modulesFour-channel and twelve-channel input arraysBattery backupUSB and Ethernet communicationProtective transport case
Planning a Temperature Mapping System specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
