Temperature mapping system in three-quarter view showing touchscreen and eight sensor inputs

Instrumen pengujian dan validasi ruang bersih

Sistem Pemetaan Suhu

A portable multi-channel data acquisition system for synchronized wired temperature mapping in sterilizers, chambers, freezers and other controlled thermal equipment.

Synchronized multi-point mapping.
Modular wired sensor inputs.
Stand-alone touch operation.

Permintaan untuk kutipan Browse Produk

Perkenalan produk

This compact mapping platform combines a rugged measurement mainframe, a local touch interface and removable thermocouple input modules in one transportable enclosure. Multiple sensors are sampled against a common clock so engineers can compare temperature distribution across a chamber or load throughout the same study. Internal storage preserves the run locally, while network and USB interfaces support study transfer and analysis without tying the instrument to a general-purpose computer during collection.

Fitur utama:

Synchronized multi-channel acquisition reveals spatial hot and cold zones.

Removable input modules simplify sensor replacement and configuration changes.

Local touch controls support stand-alone study setup and live review.

Cold-junction compensation stabilizes thermocouple measurements at the input bank.

Internal memory safeguards complete mapping records if the network is unavailable.

Battery-backed operation helps a study continue through brief supply interruptions.

Kekhawatiran produk pelanggan

Thermal equipment can meet a controller setpoint while still containing local hot or cold zones, so qualification requires simultaneous measurements distributed throughout the usable volume or process load.

Independent spot readings cannot show how the whole chamber behaves at the same moment.Common-clock channel scanning produces time-aligned measurements from every mapped location.

A sensor fault can invalidate a long qualification run.Live channel status and removable input modules help identify an open or unstable sensor before the study proceeds.

Network loss may interrupt data collection in remote equipment areas.Stand-alone controls and internal memory keep the acquisition task local to the instrument.

Different assets require different channel counts and sensor types.Modular inputs and selectable thermocouple configurations adapt the platform to each mapping plan.

Aplikasi yang Tipis

Steam sterilizer temperature mappingDry-heat oven and depyrogenation studiesStability chamber qualificationRefrigerator and freezer distribution studiesLyophilizer shelf and chamber mapping

Parameter teknis

Representative portable mapping-system construction is listed below; channel count, thermocouple type and communication accessories can be selected for the intended study.

Bahan inti	Powder-coated aluminum chassis, polycarbonate control bezel, measurement electronics and removable thermocouple input modules
Ketebalan Panel (Panel Thickness)	Typically 1.5-2.0 mm for aluminum enclosure panels
Efektif lebar	Approximately 300-420 mm across the portable mainframe
Panjang maksimum	Approximately 350-480 mm including the folded transport-handle profile
Baja menghadap ketebalan	Typically 0.8-1.2 mm for internal shielding and module-retaining plates
Kepadatan inti (core density)	Sekitar 2700 kg / m3 untuk chassis aluminium
Konduktivitas Termal (Thermal Conductivity)	Approximately 167-205 W/(m·K) for the aluminum chassis
Permukaan selesai	Off-white powder-coated enclosure with dark-navy molded bezel and orange sensor-port identifiers
Jenis Bersama	Keyed removable multi-channel input modules with thermocouple terminals plus USB and Ethernet data interfaces
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Type T thermocouple modulesType J or K thermocouple modulesFour-channel and twelve-channel input arraysBattery backupUSB and Ethernet communicationKasus Transportasi Perlindungan

Planning a Temperature Mapping System specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami