Temperature mapping system in three-quarter view showing touchscreen and eight sensor inputs

클린룸 테스트 및 검증 장비

온도 매핑 시스템

A portable multi-channel data acquisition system for synchronized wired temperature mapping in sterilizers, chambers, freezers and other controlled thermal equipment.

Synchronized multi-point mapping.
Modular wired sensor inputs.
Stand-alone touch operation.

견적 요청 제품 찾아보기

상품 소개

This compact mapping platform combines a rugged measurement mainframe, a local touch interface and removable thermocouple input modules in one transportable enclosure. Multiple sensors are sampled against a common clock so engineers can compare temperature distribution across a chamber or load throughout the same study. Internal storage preserves the run locally, while network and USB interfaces support study transfer and analysis without tying the instrument to a general-purpose computer during collection.

주요 기능

Synchronized multi-channel acquisition reveals spatial hot and cold zones.

Removable input modules simplify sensor replacement and configuration changes.

Local touch controls support stand-alone study setup and live review.

Cold-junction compensation stabilizes thermocouple measurements at the input bank.

Internal memory safeguards complete mapping records if the network is unavailable.

Battery-backed operation helps a study continue through brief supply interruptions.

고객 제품 관심사

Thermal equipment can meet a controller setpoint while still containing local hot or cold zones, so qualification requires simultaneous measurements distributed throughout the usable volume or process load.

Independent spot readings cannot show how the whole chamber behaves at the same moment.Common-clock channel scanning produces time-aligned measurements from every mapped location.

A sensor fault can invalidate a long qualification run.Live channel status and removable input modules help identify an open or unstable sensor before the study proceeds.

Network loss may interrupt data collection in remote equipment areas.Stand-alone controls and internal memory keep the acquisition task local to the instrument.

Different assets require different channel counts and sensor types.Modular inputs and selectable thermocouple configurations adapt the platform to each mapping plan.

일반적인 응용 프로그램

Steam sterilizer temperature mappingDry-heat oven and depyrogenation studiesStability chamber qualificationRefrigerator and freezer distribution studiesLyophilizer shelf and chamber mapping

기술 매개변수

Representative portable mapping-system construction is listed below; channel count, thermocouple type and communication accessories can be selected for the intended study.

핵심 재료	Powder-coated aluminum chassis, polycarbonate control bezel, measurement electronics and removable thermocouple input modules
패널 두께	Typically 1.5-2.0 mm for aluminum enclosure panels
유효 폭	Approximately 300-420 mm across the portable mainframe
최대 길이	Approximately 350-480 mm including the folded transport-handle profile
강철 면면 두께	Typically 0.8-1.2 mm for internal shielding and module-retaining plates
코어 밀도	알루미늄 섀시의 경우 약 2700 kg / m 3
열전도도 (Thermal Conductivity)	Approximately 167-205 W/(m·K) for the aluminum chassis
표면 마무리	Off-white powder-coated enclosure with dark-navy molded bezel and orange sensor-port identifiers
접합 유형	Keyed removable multi-channel input modules with thermocouple terminals plus USB and Ethernet data interfaces
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Type T thermocouple modulesType J or K thermocouple modulesFour-channel and twelve-channel input arraysBattery backupUSB and Ethernet communication보호용 수송용 케이스

Planning a Temperature Mapping System specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.