English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة الأرضيات الغرف النظيفة
الأرضيات الايبوكسي المبددة
A seamless ESD epoxy floor designed to drain charge at a controlled rate while supporting low body-voltage generation with compatible footwear.
- Controlled 10⁶–10⁹ Ω Range
- Low Body-Voltage Design
- Humidity-Stable Static Control
- Smooth Non-Porous Finish
مقدمة المنتج
Static-dissipative epoxy flooring manages electrostatic charge within a controlled resistance band rather than providing the lowest possible path to earth. This controlled discharge is suited to electronics production, semiconductor handling and instrument rooms where sudden ESD events can damage components. Conductive additives extend through the epoxy thickness, while a compatible primer and grounding arrangement complete the electrical circuit. Final performance is evaluated as a floor-footwear-person system because footwear, humidity, cleanliness and test equipment all influence measured resistance and body voltage.
الخصائص الرئيسية
Through-thickness conductive components retain static-control function as the top surface experiences normal wear.
A smooth non-porous finish supports particle control and repeated cleaning around sensitive assembly operations.
Compatible ESD footwear can be integrated with the floor to limit charge generated by walking personnel.
مخاوف المنتج للعملاء
An ESD floor is only effective when resistance, body voltage, footwear and grounding work together under the actual room conditions.
A charge too small for personnel to feel still damages an exposed electronic component.The dissipative epoxy and compatible footwear continuously reduce body voltage during movement.
Some static-control coatings change resistance sharply as humidity falls.Conductive material distributed through the resin provides a more stable path than a surface-only treatment.
A floor passes a point resistance test but fails when evaluated with production footwear.Commissioning includes floor resistance and person-floor-footwear measurements across representative locations.
Dark conductive floors make small components and contamination hard to see.Pigmented dissipative formulations provide practical light gray, medium gray and selected color options.
تطبيقات نموذجية
Electronics assembly cleanroomsSemiconductor packaging areasPrecision instrument laboratoriesData-processing roomsAerospace component assembly
المعلمات الفنية
Representative values for a self-smoothing static-dissipative epoxy floor in an ESD-controlled room are shown below.
| المواد الأساسية | Pigmented epoxy resin with uniformly dispersed static-dissipative additives and fine filler |
|---|---|
| سمك اللوحة | 1.5–3.0 mm nominal ESD wearing system thickness |
| العرض الفعال | Typically 1800–3600 mm controlled application lane width |
| الحد الأقصى الطول | Typically up to 14000 mm continuous ESD field between active joints |
| الصلب يواجه سمك | 0 mm; static dissipation is achieved within the resin system |
| الكثافة الأساسية | Approximately 1450–1600 kg/m³ for mixed ESD epoxy |
| الموصلية الحرارية | Typically 0.28–0.42 W/(m·K) for the cured static-dissipative layer |
| إنهاء السطح | Smooth high-gloss or satin, non-porous pigmented ESD finish |
| نوع المشترك | Seamless grounded ESD build-up with controlled floor resistance of 1 × 10⁶–1 × 10⁹ Ω |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
1.5, 2.0 or 3.0 mm wearing buildSmooth or light slip-resistant ESD finishLight gray, medium gray, beige and selected custom colorsGrounding grid and integral cove configuration
Planning a Static-Dissipative Epoxy Flooring specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
