Static-dissipative epoxy flooring slab in three-quarter view with a light blue-gray finish, black conductive primer and copper grounding tab

Cleanroom Flooring Sistem

Lantai Epoxy Static-Dissipatif

A seamless ESD epoxy floor designed to drain charge at a controlled rate while supporting low body-voltage generation with compatible footwear.

Controlled 10⁶–10⁹ Ω Range
Low Body-Voltage Design
Humidity-Stable Static Control
Smooth Non-Porous Finish

Permintaan untuk kutipan Browse Produk

Perkenalan produk

Static-dissipative epoxy flooring manages electrostatic charge within a controlled resistance band rather than providing the lowest possible path to earth. This controlled discharge is suited to electronics production, semiconductor handling and instrument rooms where sudden ESD events can damage components. Conductive additives extend through the epoxy thickness, while a compatible primer and grounding arrangement complete the electrical circuit. Final performance is evaluated as a floor-footwear-person system because footwear, humidity, cleanliness and test equipment all influence measured resistance and body voltage.

Fitur utama:

The designed 10⁶–10⁹ Ω resistance range dissipates charge without treating the floor as a highly conductive metal surface.

Through-thickness conductive components retain static-control function as the top surface experiences normal wear.

A smooth non-porous finish supports particle control and repeated cleaning around sensitive assembly operations.

Compatible ESD footwear can be integrated with the floor to limit charge generated by walking personnel.

Kekhawatiran produk pelanggan

An ESD floor is only effective when resistance, body voltage, footwear and grounding work together under the actual room conditions.

A charge too small for personnel to feel still damages an exposed electronic component.The dissipative epoxy and compatible footwear continuously reduce body voltage during movement.

Some static-control coatings change resistance sharply as humidity falls.Conductive material distributed through the resin provides a more stable path than a surface-only treatment.

A floor passes a point resistance test but fails when evaluated with production footwear.Commissioning includes floor resistance and person-floor-footwear measurements across representative locations.

Dark conductive floors make small components and contamination hard to see.Pigmented dissipative formulations provide practical light gray, medium gray and selected color options.

Aplikasi yang Tipis

Electronics assembly cleanroomsSemiconductor packaging areasPrecision instrument laboratoriesData-processing roomsAerospace component assembly

Parameter teknis

Representative values for a self-smoothing static-dissipative epoxy floor in an ESD-controlled room are shown below.

Bahan inti	Pigmented epoxy resin with uniformly dispersed static-dissipative additives and fine filler
Ketebalan Panel (Panel Thickness)	1.5–3.0 mm nominal ESD wearing system thickness
Efektif lebar	Typically 1800–3600 mm controlled application lane width
Panjang maksimum	Typically up to 14000 mm continuous ESD field between active joints
Baja menghadap ketebalan	0 mm; static dissipation is achieved within the resin system
Kepadatan inti (core density)	Approximately 1450–1600 kg/m³ for mixed ESD epoxy
Konduktivitas Termal (Thermal Conductivity)	Typically 0.28–0.42 W/(m·K) for the cured static-dissipative layer
Permukaan selesai	Smooth high-gloss or satin, non-porous pigmented ESD finish
Jenis Bersama	Seamless grounded ESD build-up with controlled floor resistance of 1 × 10⁶–1 × 10⁹ Ω
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

1.5, 2.0 or 3.0 mm wearing buildSmooth or light slip-resistant ESD finishLight gray, medium gray, beige and selected custom colorsGrounding grid and integral cove configuration

Planning a Static-Dissipative Epoxy Flooring specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami