İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda zemin sistemleri
Static Dissipative Epoxy Flooring (Epoxy döşeme)
A seamless ESD epoxy floor designed to drain charge at a controlled rate while supporting low body-voltage generation with compatible footwear.
- Controlled 10⁶–10⁹ Ω Range
- Low Body-Voltage Design
- Humidity-Stable Static Control
- Smooth Non-Porous Finish
Ürün tanıtımı
Static-dissipative epoxy flooring manages electrostatic charge within a controlled resistance band rather than providing the lowest possible path to earth. This controlled discharge is suited to electronics production, semiconductor handling and instrument rooms where sudden ESD events can damage components. Conductive additives extend through the epoxy thickness, while a compatible primer and grounding arrangement complete the electrical circuit. Final performance is evaluated as a floor-footwear-person system because footwear, humidity, cleanliness and test equipment all influence measured resistance and body voltage.
Ana Özellikler
Through-thickness conductive components retain static-control function as the top surface experiences normal wear.
A smooth non-porous finish supports particle control and repeated cleaning around sensitive assembly operations.
Compatible ESD footwear can be integrated with the floor to limit charge generated by walking personnel.
Müşteri Ürün Sorunları
An ESD floor is only effective when resistance, body voltage, footwear and grounding work together under the actual room conditions.
A charge too small for personnel to feel still damages an exposed electronic component.The dissipative epoxy and compatible footwear continuously reduce body voltage during movement.
Some static-control coatings change resistance sharply as humidity falls.Conductive material distributed through the resin provides a more stable path than a surface-only treatment.
A floor passes a point resistance test but fails when evaluated with production footwear.Commissioning includes floor resistance and person-floor-footwear measurements across representative locations.
Dark conductive floors make small components and contamination hard to see.Pigmented dissipative formulations provide practical light gray, medium gray and selected color options.
Tipik uygulamalar
Electronics assembly cleanroomsSemiconductor packaging areasPrecision instrument laboratoriesData-processing roomsAerospace component assembly
Teknik parametreler
Representative values for a self-smoothing static-dissipative epoxy floor in an ESD-controlled room are shown below.
| Temel malzemeler | Pigmented epoxy resin with uniformly dispersed static-dissipative additives and fine filler |
|---|---|
| Panel kalınlığı | 1.5–3.0 mm nominal ESD wearing system thickness |
| Effective Width (Etkili Genişlik) | Typically 1800–3600 mm controlled application lane width |
| Maksimum uzunluk | Typically up to 14000 mm continuous ESD field between active joints |
| Çelik yüz yüze kalınlığı | 0 mm; static dissipation is achieved within the resin system |
| Core Density (Çekirdek Yoğunluğu) | Approximately 1450–1600 kg/m³ for mixed ESD epoxy |
| Termal İletkenlik | Typically 0.28–0.42 W/(m·K) for the cured static-dissipative layer |
| Yüzey bitirme | Smooth high-gloss or satin, non-porous pigmented ESD finish |
| Ortak tip | Seamless grounded ESD build-up with controlled floor resistance of 1 × 10⁶–1 × 10⁹ Ω |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
1.5, 2.0 or 3.0 mm wearing buildSmooth or light slip-resistant ESD finishLight gray, medium gray, beige and selected custom colorsGrounding grid and integral cove configuration
Planning a Static-Dissipative Epoxy Flooring specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
