English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Системы полы для чистых комнат
Статически-диссипативный эпоксидный пол
A seamless ESD epoxy floor designed to drain charge at a controlled rate while supporting low body-voltage generation with compatible footwear.
- Controlled 10⁶–10⁹ Ω Range
- Low Body-Voltage Design
- Humidity-Stable Static Control
- Smooth Non-Porous Finish
Введение продукции
Static-dissipative epoxy flooring manages electrostatic charge within a controlled resistance band rather than providing the lowest possible path to earth. This controlled discharge is suited to electronics production, semiconductor handling and instrument rooms where sudden ESD events can damage components. Conductive additives extend through the epoxy thickness, while a compatible primer and grounding arrangement complete the electrical circuit. Final performance is evaluated as a floor-footwear-person system because footwear, humidity, cleanliness and test equipment all influence measured resistance and body voltage.
Основные характеристики
Through-thickness conductive components retain static-control function as the top surface experiences normal wear.
A smooth non-porous finish supports particle control and repeated cleaning around sensitive assembly operations.
Compatible ESD footwear can be integrated with the floor to limit charge generated by walking personnel.
Обеспокоенность клиентов продуктами
An ESD floor is only effective when resistance, body voltage, footwear and grounding work together under the actual room conditions.
A charge too small for personnel to feel still damages an exposed electronic component.The dissipative epoxy and compatible footwear continuously reduce body voltage during movement.
Some static-control coatings change resistance sharply as humidity falls.Conductive material distributed through the resin provides a more stable path than a surface-only treatment.
A floor passes a point resistance test but fails when evaluated with production footwear.Commissioning includes floor resistance and person-floor-footwear measurements across representative locations.
Dark conductive floors make small components and contamination hard to see.Pigmented dissipative formulations provide practical light gray, medium gray and selected color options.
Типичные приложения
Electronics assembly cleanroomsSemiconductor packaging areasPrecision instrument laboratoriesData-processing roomsAerospace component assembly
Технические параметры
Representative values for a self-smoothing static-dissipative epoxy floor in an ESD-controlled room are shown below.
| Основной материал | Pigmented epoxy resin with uniformly dispersed static-dissipative additives and fine filler |
|---|---|
| Толщина панели | 1.5–3.0 mm nominal ESD wearing system thickness |
| эффективная ширина | Typically 1800–3600 mm controlled application lane width |
| Максимальная длина | Typically up to 14000 mm continuous ESD field between active joints |
| Толщина линий стали | 0 mm; static dissipation is achieved within the resin system |
| Плотность ядра | Approximately 1450–1600 kg/m³ for mixed ESD epoxy |
| Теплопроводимость | Typically 0.28–0.42 W/(m·K) for the cured static-dissipative layer |
| Поверхностная отделка | Smooth high-gloss or satin, non-porous pigmented ESD finish |
| Объединенный тип | Seamless grounded ESD build-up with controlled floor resistance of 1 × 10⁶–1 × 10⁹ Ω |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
1.5, 2.0 or 3.0 mm wearing buildSmooth or light slip-resistant ESD finishLight gray, medium gray, beige and selected custom colorsGrounding grid and integral cove configuration
Planning a Static-Dissipative Epoxy Flooring specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
