Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pisos de sala limpia
Piso epoxi estático-dissipativo
A seamless ESD epoxy floor designed to drain charge at a controlled rate while supporting low body-voltage generation with compatible footwear.
- Controlled 10⁶–10⁹ Ω Range
- Low Body-Voltage Design
- Humidity-Stable Static Control
- Smooth Non-Porous Finish
Introducción del producto
Static-dissipative epoxy flooring manages electrostatic charge within a controlled resistance band rather than providing the lowest possible path to earth. This controlled discharge is suited to electronics production, semiconductor handling and instrument rooms where sudden ESD events can damage components. Conductive additives extend through the epoxy thickness, while a compatible primer and grounding arrangement complete the electrical circuit. Final performance is evaluated as a floor-footwear-person system because footwear, humidity, cleanliness and test equipment all influence measured resistance and body voltage.
Características clave
Through-thickness conductive components retain static-control function as the top surface experiences normal wear.
A smooth non-porous finish supports particle control and repeated cleaning around sensitive assembly operations.
Compatible ESD footwear can be integrated with the floor to limit charge generated by walking personnel.
Preocupaciones del producto del cliente
An ESD floor is only effective when resistance, body voltage, footwear and grounding work together under the actual room conditions.
A charge too small for personnel to feel still damages an exposed electronic component.The dissipative epoxy and compatible footwear continuously reduce body voltage during movement.
Some static-control coatings change resistance sharply as humidity falls.Conductive material distributed through the resin provides a more stable path than a surface-only treatment.
A floor passes a point resistance test but fails when evaluated with production footwear.Commissioning includes floor resistance and person-floor-footwear measurements across representative locations.
Dark conductive floors make small components and contamination hard to see.Pigmented dissipative formulations provide practical light gray, medium gray and selected color options.
Aplicaciones típicas
Electronics assembly cleanroomsSemiconductor packaging areasPrecision instrument laboratoriesData-processing roomsAerospace component assembly
Parámetros técnicos
Representative values for a self-smoothing static-dissipative epoxy floor in an ESD-controlled room are shown below.
| Materiales Core | Pigmented epoxy resin with uniformly dispersed static-dissipative additives and fine filler |
|---|---|
| Panel de espesor | 1.5–3.0 mm nominal ESD wearing system thickness |
| Ancho efectivo | Typically 1800–3600 mm controlled application lane width |
| Longitud máxima | Typically up to 14000 mm continuous ESD field between active joints |
| Acero frente a espesor | 0 mm; static dissipation is achieved within the resin system |
| Densidad Core | Approximately 1450–1600 kg/m³ for mixed ESD epoxy |
| Conductividad térmica | Typically 0.28–0.42 W/(m·K) for the cured static-dissipative layer |
| Superficie acabada | Smooth high-gloss or satin, non-porous pigmented ESD finish |
| Tipo conjunto | Seamless grounded ESD build-up with controlled floor resistance of 1 × 10⁶–1 × 10⁹ Ω |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
1.5, 2.0 or 3.0 mm wearing buildSmooth or light slip-resistant ESD finishLight gray, medium gray, beige and selected custom colorsGrounding grid and integral cove configuration
Planning a Static-Dissipative Epoxy Flooring specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
