Static-dissipative epoxy flooring slab in three-quarter view with a light blue-gray finish, black conductive primer and copper grounding tab

클린룸 바닥 시스템

정적 소모성 에폭시 바닥재

A seamless ESD epoxy floor designed to drain charge at a controlled rate while supporting low body-voltage generation with compatible footwear.

Controlled 10⁶–10⁹ Ω Range
Low Body-Voltage Design
Humidity-Stable Static Control
Smooth Non-Porous Finish

견적 요청 제품 찾아보기

상품 소개

Static-dissipative epoxy flooring manages electrostatic charge within a controlled resistance band rather than providing the lowest possible path to earth. This controlled discharge is suited to electronics production, semiconductor handling and instrument rooms where sudden ESD events can damage components. Conductive additives extend through the epoxy thickness, while a compatible primer and grounding arrangement complete the electrical circuit. Final performance is evaluated as a floor-footwear-person system because footwear, humidity, cleanliness and test equipment all influence measured resistance and body voltage.

주요 기능

The designed 10⁶–10⁹ Ω resistance range dissipates charge without treating the floor as a highly conductive metal surface.

Through-thickness conductive components retain static-control function as the top surface experiences normal wear.

A smooth non-porous finish supports particle control and repeated cleaning around sensitive assembly operations.

Compatible ESD footwear can be integrated with the floor to limit charge generated by walking personnel.

고객 제품 관심사

An ESD floor is only effective when resistance, body voltage, footwear and grounding work together under the actual room conditions.

A charge too small for personnel to feel still damages an exposed electronic component.The dissipative epoxy and compatible footwear continuously reduce body voltage during movement.

Some static-control coatings change resistance sharply as humidity falls.Conductive material distributed through the resin provides a more stable path than a surface-only treatment.

A floor passes a point resistance test but fails when evaluated with production footwear.Commissioning includes floor resistance and person-floor-footwear measurements across representative locations.

Dark conductive floors make small components and contamination hard to see.Pigmented dissipative formulations provide practical light gray, medium gray and selected color options.

일반적인 응용 프로그램

Electronics assembly cleanroomsSemiconductor packaging areasPrecision instrument laboratoriesData-processing roomsAerospace component assembly

기술 매개변수

Representative values for a self-smoothing static-dissipative epoxy floor in an ESD-controlled room are shown below.

핵심 재료	Pigmented epoxy resin with uniformly dispersed static-dissipative additives and fine filler
패널 두께	1.5–3.0 mm nominal ESD wearing system thickness
유효 폭	Typically 1800–3600 mm controlled application lane width
최대 길이	Typically up to 14000 mm continuous ESD field between active joints
강철 면면 두께	0 mm; static dissipation is achieved within the resin system
코어 밀도	Approximately 1450–1600 kg/m³ for mixed ESD epoxy
열전도도 (Thermal Conductivity)	Typically 0.28–0.42 W/(m·K) for the cured static-dissipative layer
표면 마무리	Smooth high-gloss or satin, non-porous pigmented ESD finish
접합 유형	Seamless grounded ESD build-up with controlled floor resistance of 1 × 10⁶–1 × 10⁹ Ω
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

1.5, 2.0 or 3.0 mm wearing buildSmooth or light slip-resistant ESD finishLight gray, medium gray, beige and selected custom colorsGrounding grid and integral cove configuration

Planning a Static-Dissipative Epoxy Flooring specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.