English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أثاث الغرف النظيفة ومنتجات الفولاذ المقاوم للصدأ
الفولاذ المقاوم للصدأ علبة الرف
A stationary Type 304 stainless tray rack with ten removable cobalt-blue trays, paired slide rails, positive pull-out stops and four height-adjustable leveling feet.
- Ten removable blue trays
- Paired stainless slide rails
- Positive tray stops
- Four leveling feet
مقدمة المنتج
The stainless steel tray rack organizes ten small process trays at a fixed workstation without the caster and push-handle hardware of a transport cart. Its Type 304 square-tube frame supports ten pairs of welded slide rails at even 90 mm spacing. Each cobalt-blue polypropylene tray has a molded front pull and a rear stop that remains engaged until the tray is deliberately lifted. Four threaded leveling feet compensate for floor variation while a top cross-frame prevents the tall narrow rack from racking sideways.
الخصائص الرئيسية
Rear stops retain each tray during routine partial withdrawal.
A diagonal-free welded frame leaves both side faces open for wiping around the runners.
Threaded leveling feet stabilize the rack without introducing mobile-cart hardware.
مخاوف المنتج للعملاء
Stationary tray storage must keep every level identifiable, prevent accidental full withdrawal and stand rigidly on an imperfect cleanroom floor.
Stacked trays hide lower batches and require repeated handling.Ten independently accessible runner levels expose every tray pull at the front.
A tray leaves its rails when pulled quickly by a gloved operator.A rear molded stop remains behind the stainless runner until the tray is lifted deliberately.
A narrow tall rack rocks on uneven resin flooring.Four threaded feet provide independent height correction and locknuts.
Closed side panels hide residue around the runner ends.The open square-tube frame leaves the paired slide rails visible from both sides.
تطبيقات نموذجية
Cleanroom component kittingLaboratory sample tray storageMedical-device work-in-process organizationElectronics parts stagingPharmaceutical utensil segregation
المعلمات الفنية
Typical configurable specifications for a stationary ten-tray stainless cleanroom rack are listed below.
| المواد الأساسية | Type 304 stainless square-tube frame and slide rails with ten cobalt-blue polypropylene trays |
|---|---|
| سمك اللوحة | 1.5 mm stainless square-tube wall |
| العرض الفعال | 400 mm clear tray-runner width |
| الحد الأقصى الطول | 550 mm maximum rack depth |
| الصلب يواجه سمك | 1.5 mm Type 304 frame tube wall; 1.2 mm formed runner rails |
| الكثافة الأساسية | 7900–8000 kg/m³ for Type 304 stainless components |
| الموصلية الحرارية | 14-17 واط / (م · ك) لمكونات 304 غير القابل للصدأ |
| إنهاء السطح | Satin-brushed stainless frame with cobalt-blue smooth polypropylene trays |
| نوع المشترك | TIG-welded open frame with paired runner rails, molded tray stops and threaded leveling-foot sockets |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
نوع 316L الإطار الفولاذ المقاوم للصدأPerforated stainless traysEight or twelve levelsWall anchor brackets
Planning a Stainless Steel Tray Rack specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
