Stationary stainless cleanroom tray rack with ten blue trays

클린룸 가구 및 스테인레스 스틸 제품

스테인레스 스틸 트레이 랙

A stationary Type 304 stainless tray rack with ten removable cobalt-blue trays, paired slide rails, positive pull-out stops and four height-adjustable leveling feet.

Ten removable blue trays
Paired stainless slide rails
Positive tray stops
Four leveling feet

견적 요청 제품 찾아보기

상품 소개

The stainless steel tray rack organizes ten small process trays at a fixed workstation without the caster and push-handle hardware of a transport cart. Its Type 304 square-tube frame supports ten pairs of welded slide rails at even 90 mm spacing. Each cobalt-blue polypropylene tray has a molded front pull and a rear stop that remains engaged until the tray is deliberately lifted. Four threaded leveling feet compensate for floor variation while a top cross-frame prevents the tall narrow rack from racking sideways.

주요 기능

Ten paired runner levels keep process trays separated and individually accessible.

Rear stops retain each tray during routine partial withdrawal.

A diagonal-free welded frame leaves both side faces open for wiping around the runners.

Threaded leveling feet stabilize the rack without introducing mobile-cart hardware.

고객 제품 관심사

Stationary tray storage must keep every level identifiable, prevent accidental full withdrawal and stand rigidly on an imperfect cleanroom floor.

Stacked trays hide lower batches and require repeated handling.Ten independently accessible runner levels expose every tray pull at the front.

A tray leaves its rails when pulled quickly by a gloved operator.A rear molded stop remains behind the stainless runner until the tray is lifted deliberately.

A narrow tall rack rocks on uneven resin flooring.Four threaded feet provide independent height correction and locknuts.

Closed side panels hide residue around the runner ends.The open square-tube frame leaves the paired slide rails visible from both sides.

일반적인 응용 프로그램

Cleanroom component kittingLaboratory sample tray storageMedical-device work-in-process organizationElectronics parts stagingPharmaceutical utensil segregation

기술 매개변수

Typical configurable specifications for a stationary ten-tray stainless cleanroom rack are listed below.

핵심 재료	Type 304 stainless square-tube frame and slide rails with ten cobalt-blue polypropylene trays
패널 두께	1.5 mm stainless square-tube wall
유효 폭	400 mm clear tray-runner width
최대 길이	550 mm maximum rack depth
강철 면면 두께	1.5 mm Type 304 frame tube wall; 1.2 mm formed runner rails
코어 밀도	7900–8000 kg/m³ for Type 304 stainless components
열전도도 (Thermal Conductivity)	14 - 17 W / (m · K) Type 304 스테인레스 부품
표면 마무리	Satin-brushed stainless frame with cobalt-blue smooth polypropylene trays
접합 유형	TIG-welded open frame with paired runner rails, molded tray stops and threaded leveling-foot sockets
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

유형 316 L 스테인레스 프레임Perforated stainless traysEight or twelve levelsWall anchor brackets

Planning a Stainless Steel Tray Rack specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.