Stationary stainless cleanroom tray rack with ten blue trays

Cleanroom Furniture dan Produk Stainless Steel

Rak nampan baja stainless steel

A stationary Type 304 stainless tray rack with ten removable cobalt-blue trays, paired slide rails, positive pull-out stops and four height-adjustable leveling feet.

Ten removable blue trays
Paired stainless slide rails
Positive tray stops
Four leveling feet

Permintaan untuk kutipan Browse Produk

Perkenalan produk

The stainless steel tray rack organizes ten small process trays at a fixed workstation without the caster and push-handle hardware of a transport cart. Its Type 304 square-tube frame supports ten pairs of welded slide rails at even 90 mm spacing. Each cobalt-blue polypropylene tray has a molded front pull and a rear stop that remains engaged until the tray is deliberately lifted. Four threaded leveling feet compensate for floor variation while a top cross-frame prevents the tall narrow rack from racking sideways.

Fitur utama:

Ten paired runner levels keep process trays separated and individually accessible.

Rear stops retain each tray during routine partial withdrawal.

A diagonal-free welded frame leaves both side faces open for wiping around the runners.

Threaded leveling feet stabilize the rack without introducing mobile-cart hardware.

Kekhawatiran produk pelanggan

Stationary tray storage must keep every level identifiable, prevent accidental full withdrawal and stand rigidly on an imperfect cleanroom floor.

Stacked trays hide lower batches and require repeated handling.Ten independently accessible runner levels expose every tray pull at the front.

A tray leaves its rails when pulled quickly by a gloved operator.A rear molded stop remains behind the stainless runner until the tray is lifted deliberately.

A narrow tall rack rocks on uneven resin flooring.Four threaded feet provide independent height correction and locknuts.

Closed side panels hide residue around the runner ends.The open square-tube frame leaves the paired slide rails visible from both sides.

Aplikasi yang Tipis

Cleanroom component kittingLaboratory sample tray storageMedical-device work-in-process organizationElectronics parts stagingPharmaceutical utensil segregation

Parameter teknis

Typical configurable specifications for a stationary ten-tray stainless cleanroom rack are listed below.

Bahan inti	Type 304 stainless square-tube frame and slide rails with ten cobalt-blue polypropylene trays
Ketebalan Panel (Panel Thickness)	1.5 mm stainless square-tube wall
Efektif lebar	400 mm clear tray-runner width
Panjang maksimum	550 mm maximum rack depth
Baja menghadap ketebalan	1.5 mm Type 304 frame tube wall; 1.2 mm formed runner rails
Kepadatan inti (core density)	7900–8000 kg/m³ for Type 304 stainless components
Konduktivitas Termal (Thermal Conductivity)	14 - 17 W / (m · K) untuk komponen stainless Tipe 304
Permukaan selesai	Satin-brushed stainless frame with cobalt-blue smooth polypropylene trays
Jenis Bersama	TIG-welded open frame with paired runner rails, molded tray stops and threaded leveling-foot sockets
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

Tipe 316L bingkai stainlessPerforated stainless traysEight or twelve levelsWall anchor brackets

Planning a Stainless Steel Tray Rack specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami