İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Temiz Oda Mobilyaları ve Paslanmaz Çelik Ürünleri
Paslanmaz Çelik Tepsisi Rafı
A stationary Type 304 stainless tray rack with ten removable cobalt-blue trays, paired slide rails, positive pull-out stops and four height-adjustable leveling feet.
- Ten removable blue trays
- Paired stainless slide rails
- Positive tray stops
- Four leveling feet
Ürün tanıtımı
The stainless steel tray rack organizes ten small process trays at a fixed workstation without the caster and push-handle hardware of a transport cart. Its Type 304 square-tube frame supports ten pairs of welded slide rails at even 90 mm spacing. Each cobalt-blue polypropylene tray has a molded front pull and a rear stop that remains engaged until the tray is deliberately lifted. Four threaded leveling feet compensate for floor variation while a top cross-frame prevents the tall narrow rack from racking sideways.
Ana Özellikler
Rear stops retain each tray during routine partial withdrawal.
A diagonal-free welded frame leaves both side faces open for wiping around the runners.
Threaded leveling feet stabilize the rack without introducing mobile-cart hardware.
Müşteri Ürün Sorunları
Stationary tray storage must keep every level identifiable, prevent accidental full withdrawal and stand rigidly on an imperfect cleanroom floor.
Stacked trays hide lower batches and require repeated handling.Ten independently accessible runner levels expose every tray pull at the front.
A tray leaves its rails when pulled quickly by a gloved operator.A rear molded stop remains behind the stainless runner until the tray is lifted deliberately.
A narrow tall rack rocks on uneven resin flooring.Four threaded feet provide independent height correction and locknuts.
Closed side panels hide residue around the runner ends.The open square-tube frame leaves the paired slide rails visible from both sides.
Tipik uygulamalar
Cleanroom component kittingLaboratory sample tray storageMedical-device work-in-process organizationElectronics parts stagingPharmaceutical utensil segregation
Teknik parametreler
Typical configurable specifications for a stationary ten-tray stainless cleanroom rack are listed below.
| Temel malzemeler | Type 304 stainless square-tube frame and slide rails with ten cobalt-blue polypropylene trays |
|---|---|
| Panel kalınlığı | 1.5 mm stainless square-tube wall |
| Effective Width (Etkili Genişlik) | 400 mm clear tray-runner width |
| Maksimum uzunluk | 550 mm maximum rack depth |
| Çelik yüz yüze kalınlığı | 1.5 mm Type 304 frame tube wall; 1.2 mm formed runner rails |
| Core Density (Çekirdek Yoğunluğu) | 7900–8000 kg/m³ for Type 304 stainless components |
| Termal İletkenlik | Tip 304 paslanmaz bileşenler için 14-17 W / (m · K) |
| Yüzey bitirme | Satin-brushed stainless frame with cobalt-blue smooth polypropylene trays |
| Ortak tip | TIG-welded open frame with paired runner rails, molded tray stops and threaded leveling-foot sockets |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Tip 316L paslanmaz çerçevePerforated stainless traysEight or twelve levelsWall anchor brackets
Planning a Stainless Steel Tray Rack specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
