Stationary stainless cleanroom tray rack with ten blue trays

クリーンルーム家具 · ステンレス製品

ステンレス鋼のトレイラック

A stationary Type 304 stainless tray rack with ten removable cobalt-blue trays, paired slide rails, positive pull-out stops and four height-adjustable leveling feet.

Ten removable blue trays
Paired stainless slide rails
Positive tray stops
Four leveling feet

見積もりリクエスト製品案内

商品紹介

The stainless steel tray rack organizes ten small process trays at a fixed workstation without the caster and push-handle hardware of a transport cart. Its Type 304 square-tube frame supports ten pairs of welded slide rails at even 90 mm spacing. Each cobalt-blue polypropylene tray has a molded front pull and a rear stop that remains engaged until the tray is deliberately lifted. Four threaded leveling feet compensate for floor variation while a top cross-frame prevents the tall narrow rack from racking sideways.

主要な特徴

Ten paired runner levels keep process trays separated and individually accessible.

Rear stops retain each tray during routine partial withdrawal.

A diagonal-free welded frame leaves both side faces open for wiping around the runners.

Threaded leveling feet stabilize the rack without introducing mobile-cart hardware.

お客様の製品に関する懸念事項

Stationary tray storage must keep every level identifiable, prevent accidental full withdrawal and stand rigidly on an imperfect cleanroom floor.

Stacked trays hide lower batches and require repeated handling.Ten independently accessible runner levels expose every tray pull at the front.

A tray leaves its rails when pulled quickly by a gloved operator.A rear molded stop remains behind the stainless runner until the tray is lifted deliberately.

A narrow tall rack rocks on uneven resin flooring.Four threaded feet provide independent height correction and locknuts.

Closed side panels hide residue around the runner ends.The open square-tube frame leaves the paired slide rails visible from both sides.

典型的な用途

Cleanroom component kittingLaboratory sample tray storageMedical-device work-in-process organizationElectronics parts stagingPharmaceutical utensil segregation

技術的なパラメータ

Typical configurable specifications for a stationary ten-tray stainless cleanroom rack are listed below.

コア材料	Type 304 stainless square-tube frame and slide rails with ten cobalt-blue polypropylene trays
パネルの厚さ	1.5 mm stainless square-tube wall
有効幅	400 mm clear tray-runner width
最大長さ	550 mm maximum rack depth
鋼鉄の厚さを直面する	1.5 mm Type 304 frame tube wall; 1.2 mm formed runner rails
コア密度	7900–8000 kg/m³ for Type 304 stainless components
熱伝導率	タイプ 304 ステンレス部品用 14 〜 17 W / （m · K）
表面仕上げ	Satin-brushed stainless frame with cobalt-blue smooth polypropylene trays
ジョイントタイプ	TIG-welded open frame with paired runner rails, molded tray stops and threaded leveling-foot sockets
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Z タイプ 316L ステンレスフレームPerforated stainless traysEight or twelve levelsWall anchor brackets

Planning a Stainless Steel Tray Rack specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する