Stationary stainless cleanroom tray rack with ten blue trays

Мебель для чистых комнат и изделия из нержавеющей стали

Корпус нержавеющей стали

A stationary Type 304 stainless tray rack with ten removable cobalt-blue trays, paired slide rails, positive pull-out stops and four height-adjustable leveling feet.

Ten removable blue trays
Paired stainless slide rails
Positive tray stops
Four leveling feet

Запрос котировки Просмотреть продукты

Введение продукции

The stainless steel tray rack organizes ten small process trays at a fixed workstation without the caster and push-handle hardware of a transport cart. Its Type 304 square-tube frame supports ten pairs of welded slide rails at even 90 mm spacing. Each cobalt-blue polypropylene tray has a molded front pull and a rear stop that remains engaged until the tray is deliberately lifted. Four threaded leveling feet compensate for floor variation while a top cross-frame prevents the tall narrow rack from racking sideways.

Основные характеристики

Ten paired runner levels keep process trays separated and individually accessible.

Rear stops retain each tray during routine partial withdrawal.

A diagonal-free welded frame leaves both side faces open for wiping around the runners.

Threaded leveling feet stabilize the rack without introducing mobile-cart hardware.

Обеспокоенность клиентов продуктами

Stationary tray storage must keep every level identifiable, prevent accidental full withdrawal and stand rigidly on an imperfect cleanroom floor.

Stacked trays hide lower batches and require repeated handling.Ten independently accessible runner levels expose every tray pull at the front.

A tray leaves its rails when pulled quickly by a gloved operator.A rear molded stop remains behind the stainless runner until the tray is lifted deliberately.

A narrow tall rack rocks on uneven resin flooring.Four threaded feet provide independent height correction and locknuts.

Closed side panels hide residue around the runner ends.The open square-tube frame leaves the paired slide rails visible from both sides.

Типичные приложения

Cleanroom component kittingLaboratory sample tray storageMedical-device work-in-process organizationElectronics parts stagingPharmaceutical utensil segregation

Технические параметры

Typical configurable specifications for a stationary ten-tray stainless cleanroom rack are listed below.

Основной материал	Type 304 stainless square-tube frame and slide rails with ten cobalt-blue polypropylene trays
Толщина панели	1.5 mm stainless square-tube wall
эффективная ширина	400 mm clear tray-runner width
Максимальная длина	550 mm maximum rack depth
Толщина линий стали	1.5 mm Type 304 frame tube wall; 1.2 mm formed runner rails
Плотность ядра	7900–8000 kg/m³ for Type 304 stainless components
Теплопроводимость	14–17 W/(m·K) for Type 304 stainless components
Поверхностная отделка	Satin-brushed stainless frame with cobalt-blue smooth polypropylene trays
Объединенный тип	TIG-welded open frame with paired runner rails, molded tray stops and threaded leveling-foot sockets
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

Type 316L stainless framePerforated stainless traysEight or twelve levelsWall anchor brackets

Planning a Stainless Steel Tray Rack specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой