English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
أنظمة الجدار والسقف للغرفة النظيفة
لوحة ساندويتش غرف الأبحاث الصخرية السيليكا
A steel-faced cleanroom panel with a rigid silica-based inorganic core, offering a hard surface-supporting center, low moisture uptake and stable modular construction for hygienic walls and ceilings.
- Rigid Silica Mineral Core
- Low Moisture Uptake
- Hard Compression-Resistant Center
- Clean Steel Surface
مقدمة المنتج
Silica Rock Cleanroom Sandwich Panels place a pressed inorganic core made from silica-rich mineral material and magnesium-based binders between coated steel sheets. Unlike fibrous insulation, the hard core provides continuous support beneath the outer skins and resists local compression. Its relatively low water absorption makes the material useful in controlled areas with moderate humidity. Precision edge profiles close the mineral center and create straight modular joints. The result is a solid, wipeable partition or ceiling panel suited to cleanrooms that favor inorganic construction and firm surface support.
الخصائص الرئيسية
Hard mineral structure resists localized compression better than low-density foam or paper cells.
Low moisture uptake helps maintain panel dimensions in normal humid cleanroom service.
Enclosed edges prevent mineral dust from reaching the controlled room.
Machine-formed joints align quickly and leave a narrow hygienic sealant line.
مخاوف المنتج للعملاء
Customers focus on mineral dust containment, core brittleness, panel mass and the protection of cut edges.
A brittle inorganic core can chip when a panel is cut carelessly on site.Factory sizing and finished cut-outs reduce uncontrolled edge damage.
Mineral dust must never enter a controlled environment through unfinished openings.Steel skins and sealed closure profiles isolate every exposed core surface.
Dense panels require more careful lifting than lightweight foam modules.Balanced lifting points and practical module lengths protect both workers and panel edges.
Surface impacts can crack an unsupported facing over a void.The continuous rigid core supports the skin across the full panel area.
تطبيقات نموذجية
Pharmaceutical cleanroom wallsMedical-device production roomsLaboratory partitionsFood-processing clean areasElectronics manufacturing ceilings
المعلمات الفنية
Common specifications for silica rock cleanroom panels are shown below.
| المواد الأساسية | Rigid silica rock inorganic composite |
|---|---|
| سمك اللوحة | 50, 75, 100 or 150 mm |
| العرض الفعال | 950 or 1150 mm |
| الحد الأقصى الطول | 6000 mm |
| الصلب يواجه سمك | 0.40–0.70 mm |
| الكثافة الأساسية | 80–100 kg/m³ |
| الموصلية الحرارية | Approximately 0.050 W/(m·K) |
| إنهاء السطح | PE-, HDP- or PVDF-coated galvanized steel |
| نوع المشترك | Tongue-and-groove, cam-lock or framed aluminum connection |
| التخصيص | متاح بناءً على التطبيق المقصود وبيئة التشغيل |
الخيارات المتاحة
Alternative mineral formulationStainless steel facingHandmade or machine-made edgeFactory-cut openings
Planning a Silica Rock Cleanroom Sandwich Panel specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
