Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Sistemas de pared y techo de sala limpia
Panel Sandwich de Silica Rock Cleanroom
A steel-faced cleanroom panel with a rigid silica-based inorganic core, offering a hard surface-supporting center, low moisture uptake and stable modular construction for hygienic walls and ceilings.
- Rigid Silica Mineral Core
- Low Moisture Uptake
- Hard Compression-Resistant Center
- Clean Steel Surface
Introducción del producto
Silica Rock Cleanroom Sandwich Panels place a pressed inorganic core made from silica-rich mineral material and magnesium-based binders between coated steel sheets. Unlike fibrous insulation, the hard core provides continuous support beneath the outer skins and resists local compression. Its relatively low water absorption makes the material useful in controlled areas with moderate humidity. Precision edge profiles close the mineral center and create straight modular joints. The result is a solid, wipeable partition or ceiling panel suited to cleanrooms that favor inorganic construction and firm surface support.
Características clave
Hard mineral structure resists localized compression better than low-density foam or paper cells.
Low moisture uptake helps maintain panel dimensions in normal humid cleanroom service.
Enclosed edges prevent mineral dust from reaching the controlled room.
Machine-formed joints align quickly and leave a narrow hygienic sealant line.
Preocupaciones del producto del cliente
Customers focus on mineral dust containment, core brittleness, panel mass and the protection of cut edges.
A brittle inorganic core can chip when a panel is cut carelessly on site.Factory sizing and finished cut-outs reduce uncontrolled edge damage.
Mineral dust must never enter a controlled environment through unfinished openings.Steel skins and sealed closure profiles isolate every exposed core surface.
Dense panels require more careful lifting than lightweight foam modules.Balanced lifting points and practical module lengths protect both workers and panel edges.
Surface impacts can crack an unsupported facing over a void.The continuous rigid core supports the skin across the full panel area.
Aplicaciones típicas
Pharmaceutical cleanroom wallsMedical-device production roomsLaboratory partitionsFood-processing clean areasElectronics manufacturing ceilings
Parámetros técnicos
Common specifications for silica rock cleanroom panels are shown below.
| Materiales Core | Rigid silica rock inorganic composite |
|---|---|
| Panel de espesor | 50, 75, 100 or 150 mm |
| Ancho efectivo | 950 or 1150 mm |
| Longitud máxima | 6000 mm |
| Acero frente a espesor | 0.40–0.70 mm |
| Densidad Core | 80–100 kg/m³ |
| Conductividad térmica | Approximately 0.050 W/(m·K) |
| Superficie acabada | PE-, HDP- or PVDF-coated galvanized steel |
| Tipo conjunto | Tongue-and-groove, cam-lock or framed aluminum connection |
| Customization | Disponible según la aplicación prevista y el entorno operativo |
Opciones disponibles
Alternative mineral formulationStainless steel facingHandmade or machine-made edgeFactory-cut openings
Planning a Silica Rock Cleanroom Sandwich Panel specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
