Anglais
Allemand
Arabe
FrançaisCurrent
Indonésien
Japonais
Coréen
Le malais
Le portugais
russe
espagnol
Thaïlandais
Le turc
Le vietnamien
Cleanroom mur et systèmes de plafond
Silica Rock Cleanroom Panneau sandwich
A steel-faced cleanroom panel with a rigid silica-based inorganic core, offering a hard surface-supporting center, low moisture uptake and stable modular construction for hygienic walls and ceilings.
- Rigid Silica Mineral Core
- Low Moisture Uptake
- Hard Compression-Resistant Center
- Clean Steel Surface
Introduction de produit
Silica Rock Cleanroom Sandwich Panels place a pressed inorganic core made from silica-rich mineral material and magnesium-based binders between coated steel sheets. Unlike fibrous insulation, the hard core provides continuous support beneath the outer skins and resists local compression. Its relatively low water absorption makes the material useful in controlled areas with moderate humidity. Precision edge profiles close the mineral center and create straight modular joints. The result is a solid, wipeable partition or ceiling panel suited to cleanrooms that favor inorganic construction and firm surface support.
Key Features
Hard mineral structure resists localized compression better than low-density foam or paper cells.
Low moisture uptake helps maintain panel dimensions in normal humid cleanroom service.
Enclosed edges prevent mineral dust from reaching the controlled room.
Machine-formed joints align quickly and leave a narrow hygienic sealant line.
Préoccupations du client produit
Customers focus on mineral dust containment, core brittleness, panel mass and the protection of cut edges.
A brittle inorganic core can chip when a panel is cut carelessly on site.Factory sizing and finished cut-outs reduce uncontrolled edge damage.
Mineral dust must never enter a controlled environment through unfinished openings.Steel skins and sealed closure profiles isolate every exposed core surface.
Dense panels require more careful lifting than lightweight foam modules.Balanced lifting points and practical module lengths protect both workers and panel edges.
Surface impacts can crack an unsupported facing over a void.The continuous rigid core supports the skin across the full panel area.
Les applications typiques
Pharmaceutical cleanroom wallsMedical-device production roomsLaboratory partitionsFood-processing clean areasElectronics manufacturing ceilings
Paramètres techniques
Common specifications for silica rock cleanroom panels are shown below.
| Matériaux de base | Rigid silica rock inorganic composite |
|---|---|
| Panneau épaisseur | 50, 75, 100 ou 150 mm |
| Largeur effective | 950 ou 1150 mm |
| Longueur maximale | 6000 mm |
| Acier face épaisseur | 0.40–0.70 mm |
| Densité Core | 80–100 kg/m³ |
| Conductivité thermique | Approximately 0.050 W/(m·K) |
| surface finie | PE-, HDP- or PVDF-coated galvanized steel |
| Type joint | Tongue-and-groove, cam-lock or framed aluminum connection |
| Customisation | Disponible en fonction de l'application prévue et de l'environnement d'exploitation |
Options disponibles
Alternative mineral formulationStainless steel facingHandmade or machine-made edgeFactory-cut openings
Planning a Silica Rock Cleanroom Sandwich Panel specification?
Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.
