Complete silica rock cleanroom sandwich panel with coated steel facings

클린룸 벽 및 천장 시스템

실리카 록 클린룸 샌드위치 패널

A steel-faced cleanroom panel with a rigid silica-based inorganic core, offering a hard surface-supporting center, low moisture uptake and stable modular construction for hygienic walls and ceilings.

Rigid Silica Mineral Core
Low Moisture Uptake
Hard Compression-Resistant Center
Clean Steel Surface

견적 요청 제품 찾아보기

상품 소개

Silica Rock Cleanroom Sandwich Panels place a pressed inorganic core made from silica-rich mineral material and magnesium-based binders between coated steel sheets. Unlike fibrous insulation, the hard core provides continuous support beneath the outer skins and resists local compression. Its relatively low water absorption makes the material useful in controlled areas with moderate humidity. Precision edge profiles close the mineral center and create straight modular joints. The result is a solid, wipeable partition or ceiling panel suited to cleanrooms that favor inorganic construction and firm surface support.

주요 기능

A pressed silica-rich core provides continuous support beneath both external steel faces.

Hard mineral structure resists localized compression better than low-density foam or paper cells.

Low moisture uptake helps maintain panel dimensions in normal humid cleanroom service.

Enclosed edges prevent mineral dust from reaching the controlled room.

Machine-formed joints align quickly and leave a narrow hygienic sealant line.

고객 제품 관심사

Customers focus on mineral dust containment, core brittleness, panel mass and the protection of cut edges.

A brittle inorganic core can chip when a panel is cut carelessly on site.Factory sizing and finished cut-outs reduce uncontrolled edge damage.

Mineral dust must never enter a controlled environment through unfinished openings.Steel skins and sealed closure profiles isolate every exposed core surface.

Dense panels require more careful lifting than lightweight foam modules.Balanced lifting points and practical module lengths protect both workers and panel edges.

Surface impacts can crack an unsupported facing over a void.The continuous rigid core supports the skin across the full panel area.

일반적인 응용 프로그램

Pharmaceutical cleanroom wallsMedical-device production roomsLaboratory partitionsFood-processing clean areasElectronics manufacturing ceilings

기술 매개변수

Common specifications for silica rock cleanroom panels are shown below.

핵심 재료	Rigid silica rock inorganic composite
패널 두께	50, 75, 100 또는 150 mm
유효 폭	950 또는 1150 mm
최대 길이	6000 mm
강철 면면 두께	0.40–0.70 mm
코어 밀도	80–100 kg/m³
열전도도 (Thermal Conductivity)	Approximately 0.050 W/(m·K)
표면 마무리	PE, HDP 또는 PVDF 코팅 아연금 강철
접합 유형	Tongue-and-groove, cam-lock or framed aluminum connection
사용자 정의	사용 대상 어플리케이션 및 운영 환경에 따라 사용 가능

사용 가능한 옵션

Alternative mineral formulationStainless steel facingHandmade or machine-made edgeFactory-cut openings

Planning a Silica Rock Cleanroom Sandwich Panel specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.