Complete silica rock cleanroom sandwich panel with coated steel facings

Стенные и потолочные системы для чистых комнат

Сандвич-панель чистой комнаты Silica Rock

A steel-faced cleanroom panel with a rigid silica-based inorganic core, offering a hard surface-supporting center, low moisture uptake and stable modular construction for hygienic walls and ceilings.

Rigid Silica Mineral Core
Low Moisture Uptake
Hard Compression-Resistant Center
Clean Steel Surface

Запрос котировки Просмотреть продукты

Введение продукции

Silica Rock Cleanroom Sandwich Panels place a pressed inorganic core made from silica-rich mineral material and magnesium-based binders between coated steel sheets. Unlike fibrous insulation, the hard core provides continuous support beneath the outer skins and resists local compression. Its relatively low water absorption makes the material useful in controlled areas with moderate humidity. Precision edge profiles close the mineral center and create straight modular joints. The result is a solid, wipeable partition or ceiling panel suited to cleanrooms that favor inorganic construction and firm surface support.

Основные характеристики

A pressed silica-rich core provides continuous support beneath both external steel faces.

Hard mineral structure resists localized compression better than low-density foam or paper cells.

Low moisture uptake helps maintain panel dimensions in normal humid cleanroom service.

Enclosed edges prevent mineral dust from reaching the controlled room.

Machine-formed joints align quickly and leave a narrow hygienic sealant line.

Обеспокоенность клиентов продуктами

Customers focus on mineral dust containment, core brittleness, panel mass and the protection of cut edges.

A brittle inorganic core can chip when a panel is cut carelessly on site.Factory sizing and finished cut-outs reduce uncontrolled edge damage.

Mineral dust must never enter a controlled environment through unfinished openings.Steel skins and sealed closure profiles isolate every exposed core surface.

Dense panels require more careful lifting than lightweight foam modules.Balanced lifting points and practical module lengths protect both workers and panel edges.

Surface impacts can crack an unsupported facing over a void.The continuous rigid core supports the skin across the full panel area.

Типичные приложения

Pharmaceutical cleanroom wallsMedical-device production roomsLaboratory partitionsFood-processing clean areasElectronics manufacturing ceilings

Технические параметры

Common specifications for silica rock cleanroom panels are shown below.

Основной материал	Rigid silica rock inorganic composite
Толщина панели	50, 75, 100 or 150 mm
эффективная ширина	950 or 1150 mm
Максимальная длина	6000 mm
Толщина линий стали	0.40–0.70 mm
Плотность ядра	80–100 kg/m³
Теплопроводимость	Approximately 0.050 W/(m·K)
Поверхностная отделка	PE-, HDP- or PVDF-coated galvanized steel
Объединенный тип	Tongue-and-groove, cam-lock or framed aluminum connection
Customization	Доступно в зависимости от предполагаемого приложения и операционной среды

Доступные варианты

Alternative mineral formulationStainless steel facingHandmade or machine-made edgeFactory-cut openings

Planning a Silica Rock Cleanroom Sandwich Panel specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой