English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
مرشحات الهواء والترشيح الكيميائي
Safe-تغيير تصفية الإسكان
A compact containment housing with a protected service sleeve and mistake-resistant clamp for changing loaded filters without opening them to the room.
- Protected Service Sleeve
- Mistake-Resistant Clamping
- Inspection Window
- Compact Containment Module
مقدمة المنتج
The safe-change housing integrates a flexible replacement barrier into a compact welded enclosure. A clear service window confirms that the filter and bag are present before the door is released, while the internal shaft cannot reach its locked position unless the filter is correctly seated. The housing can accept particulate or molecular cells and connect into a modular exhaust line. Its removable lightweight door and external operating handle reduce the number of actions carried out inside the barrier.
الخصائص الرئيسية
Mechanical poka-yoke geometry prevents clamping before the element is fully seated.
A viewing window permits filter-position checks without removing the access door.
Corner-connected modules build larger banks while maintaining a rigid sealing frame.
مخاوف المنتج للعملاء
Contained change is only reliable when the filter, clamp, service barrier and access door are used in the correct sequence.
A technician begins service without confirming that the barrier bag is present.The inspection window provides an external view of the installed filter and change sleeve.
A partially seated filter is clamped and creates a hidden bypass path.The locating feature blocks the clamp from closing until the element reaches its sealing position.
A heavy access door is awkward to handle through protective equipment.A removable lightweight door reduces handling force around the service opening.
Adding a second filtration stage creates an unsealed field transition.Matched modular interfaces connect stages with a continuous compression gasket.
تطبيقات نموذجية
Pharmaceutical potent-compound exhaustMicrobiology research suitesAnimal disease facilitiesHospital isolation ventilationChemical sampling enclosures
المعلمات الفنية
Typical construction ranges for a compact safe-change filter housing are shown below.
| المواد الأساسية | Welded 304 stainless-steel enclosure with stainless internal filter rack and clamp shaft |
|---|---|
| سمك اللوحة | 1.2–2.5 mm enclosure panels |
| العرض الفعال | 305–1220 mm for one- or two-filter-wide modules |
| الحد الأقصى الطول | Up to 2000 mm per assembled multi-stage section |
| الصلب يواجه سمك | 1.2–2.5 mm 304 stainless-steel casing and sealing frame |
| الكثافة الأساسية | Approximately 8000 kg/m³ for 304 stainless-steel structural parts |
| الموصلية الحرارية | Approximately 14.5–16.5 W/(m·K) for the compact 304 stainless module |
| إنهاء السطح | Cleaned brushed stainless steel with smooth continuous welds |
| نوع المشترك | Modular corner-bolted connection with continuous gasket, protected service collar and safety clamp |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
Particulate or molecular filter sectionIntegrated viewing windowUpstream and downstream isolationPressure and aerosol test ports
Planning a Safe-Change Filter Housing specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
