İngilizce
Almanca
Arapça
Fransızca
Endonezya dilinde
Japonca
Korece
Malay dilinde
Portekizce
Rusça
İspanyolca
Taylandca
TürkçeCurrent
Vietnamca
Hava filtreleri ve kimyasal filtrasyon
Güvenli Değiştirme Filtre Konutları
A compact containment housing with a protected service sleeve and mistake-resistant clamp for changing loaded filters without opening them to the room.
- Protected Service Sleeve
- Mistake-Resistant Clamping
- Inspection Window
- Compact Containment Module
Ürün tanıtımı
The safe-change housing integrates a flexible replacement barrier into a compact welded enclosure. A clear service window confirms that the filter and bag are present before the door is released, while the internal shaft cannot reach its locked position unless the filter is correctly seated. The housing can accept particulate or molecular cells and connect into a modular exhaust line. Its removable lightweight door and external operating handle reduce the number of actions carried out inside the barrier.
Ana Özellikler
Mechanical poka-yoke geometry prevents clamping before the element is fully seated.
A viewing window permits filter-position checks without removing the access door.
Corner-connected modules build larger banks while maintaining a rigid sealing frame.
Müşteri Ürün Sorunları
Contained change is only reliable when the filter, clamp, service barrier and access door are used in the correct sequence.
A technician begins service without confirming that the barrier bag is present.The inspection window provides an external view of the installed filter and change sleeve.
A partially seated filter is clamped and creates a hidden bypass path.The locating feature blocks the clamp from closing until the element reaches its sealing position.
A heavy access door is awkward to handle through protective equipment.A removable lightweight door reduces handling force around the service opening.
Adding a second filtration stage creates an unsealed field transition.Matched modular interfaces connect stages with a continuous compression gasket.
Tipik uygulamalar
Pharmaceutical potent-compound exhaustMicrobiology research suitesAnimal disease facilitiesHospital isolation ventilationChemical sampling enclosures
Teknik parametreler
Typical construction ranges for a compact safe-change filter housing are shown below.
| Temel malzemeler | Welded 304 stainless-steel enclosure with stainless internal filter rack and clamp shaft |
|---|---|
| Panel kalınlığı | 1.2–2.5 mm enclosure panels |
| Effective Width (Etkili Genişlik) | 305–1220 mm for one- or two-filter-wide modules |
| Maksimum uzunluk | Up to 2000 mm per assembled multi-stage section |
| Çelik yüz yüze kalınlığı | 1.2–2.5 mm 304 stainless-steel casing and sealing frame |
| Core Density (Çekirdek Yoğunluğu) | Approximately 8000 kg/m³ for 304 stainless-steel structural parts |
| Termal İletkenlik | Approximately 14.5–16.5 W/(m·K) for the compact 304 stainless module |
| Yüzey bitirme | Cleaned brushed stainless steel with smooth continuous welds |
| Ortak tip | Modular corner-bolted connection with continuous gasket, protected service collar and safety clamp |
| Customization (Özelleşme) | Kullanılan uygulama ve çalışma ortamına göre kullanılabilir. |
Mevcut Seçenekler
Particulate or molecular filter sectionIntegrated viewing windowUpstream and downstream isolationPressure and aerosol test ports
Planning a Safe-Change Filter Housing specification?
Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.
