Inglés
Alemán
El árabe
Francés
Idioma indonesio
El japonés
Coreano
El malayo
El portugués
El ruso
EspañolCurrent
Tailandés
El turco
El vietnamita
Filtro de aire y filtración química
Cambio seguro de filtros de vivienda
A compact containment housing with a protected service sleeve and mistake-resistant clamp for changing loaded filters without opening them to the room.
- Protected Service Sleeve
- Mistake-Resistant Clamping
- Inspection Window
- Compact Containment Module
Introducción del producto
The safe-change housing integrates a flexible replacement barrier into a compact welded enclosure. A clear service window confirms that the filter and bag are present before the door is released, while the internal shaft cannot reach its locked position unless the filter is correctly seated. The housing can accept particulate or molecular cells and connect into a modular exhaust line. Its removable lightweight door and external operating handle reduce the number of actions carried out inside the barrier.
Características clave
Mechanical poka-yoke geometry prevents clamping before the element is fully seated.
A viewing window permits filter-position checks without removing the access door.
Corner-connected modules build larger banks while maintaining a rigid sealing frame.
Preocupaciones del producto del cliente
Contained change is only reliable when the filter, clamp, service barrier and access door are used in the correct sequence.
A technician begins service without confirming that the barrier bag is present.The inspection window provides an external view of the installed filter and change sleeve.
A partially seated filter is clamped and creates a hidden bypass path.The locating feature blocks the clamp from closing until the element reaches its sealing position.
A heavy access door is awkward to handle through protective equipment.A removable lightweight door reduces handling force around the service opening.
Adding a second filtration stage creates an unsealed field transition.Matched modular interfaces connect stages with a continuous compression gasket.
Aplicaciones típicas
Pharmaceutical potent-compound exhaustMicrobiology research suitesAnimal disease facilitiesHospital isolation ventilationChemical sampling enclosures
Parámetros técnicos
Typical construction ranges for a compact safe-change filter housing are shown below.
| Materiales Core | Welded 304 stainless-steel enclosure with stainless internal filter rack and clamp shaft |
|---|---|
| Panel de espesor | 1.2–2.5 mm enclosure panels |
| Ancho efectivo | 305–1220 mm for one- or two-filter-wide modules |
| Longitud máxima | Up to 2000 mm per assembled multi-stage section |
| Acero frente a espesor | 1.2–2.5 mm 304 stainless-steel casing and sealing frame |
| Densidad Core | Approximately 8000 kg/m³ for 304 stainless-steel structural parts |
| Conductividad térmica | Approximately 14.5–16.5 W/(m·K) for the compact 304 stainless module |
| Superficie acabada | Cleaned brushed stainless steel with smooth continuous welds |
| Tipo conjunto | Modular corner-bolted connection with continuous gasket, protected service collar and safety clamp |
| Customization | Disponible según la aplicación prevista y el entorno operativo. |
Opciones disponibles
Particulate or molecular filter sectionIntegrated viewing windowUpstream and downstream isolationPuertos de prueba de presión y aerosol
Planning a Safe-Change Filter Housing specification?
Envíenos sus dimensiones, condiciones de instalación, objetivos de rendimiento y acabado superficial requerido.
