Three-quarter view of compact stainless safe-change filter housing

エアフィルターと化学ろ過

セーフチェンジフィルターハウジング

A compact containment housing with a protected service sleeve and mistake-resistant clamp for changing loaded filters without opening them to the room.

Protected Service Sleeve
Mistake-Resistant Clamping
Inspection Window
Compact Containment Module

見積もりリクエスト製品案内

商品紹介

The safe-change housing integrates a flexible replacement barrier into a compact welded enclosure. A clear service window confirms that the filter and bag are present before the door is released, while the internal shaft cannot reach its locked position unless the filter is correctly seated. The housing can accept particulate or molecular cells and connect into a modular exhaust line. Its removable lightweight door and external operating handle reduce the number of actions carried out inside the barrier.

主要な特徴

A protected service sleeve isolates the filter throughout the exchange sequence.

Mechanical poka-yoke geometry prevents clamping before the element is fully seated.

A viewing window permits filter-position checks without removing the access door.

Corner-connected modules build larger banks while maintaining a rigid sealing frame.

お客様の製品に関する懸念事項

Contained change is only reliable when the filter, clamp, service barrier and access door are used in the correct sequence.

A technician begins service without confirming that the barrier bag is present.The inspection window provides an external view of the installed filter and change sleeve.

A partially seated filter is clamped and creates a hidden bypass path.The locating feature blocks the clamp from closing until the element reaches its sealing position.

A heavy access door is awkward to handle through protective equipment.A removable lightweight door reduces handling force around the service opening.

Adding a second filtration stage creates an unsealed field transition.Matched modular interfaces connect stages with a continuous compression gasket.

典型的な用途

Pharmaceutical potent-compound exhaustMicrobiology research suitesAnimal disease facilities病院の隔離換気Chemical sampling enclosures

技術的なパラメータ

Typical construction ranges for a compact safe-change filter housing are shown below.

コア材料	Welded 304 stainless-steel enclosure with stainless internal filter rack and clamp shaft
パネルの厚さ	1.2–2.5 mm enclosure panels
有効幅	305–1220 mm for one- or two-filter-wide modules
最大長さ	Up to 2000 mm per assembled multi-stage section
鋼鉄の厚さを直面する	1.2–2.5 mm 304 stainless-steel casing and sealing frame
コア密度	Approximately 8000 kg/m³ for 304 stainless-steel structural parts
熱伝導率	Approximately 14.5–16.5 W/(m·K) for the compact 304 stainless module
表面仕上げ	Cleaned brushed stainless steel with smooth continuous welds
ジョイントタイプ	Modular corner-bolted connection with continuous gasket, protected service collar and safety clamp
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Particulate or molecular filter sectionIntegrated viewing windowUpstream and downstream isolationPressure and aerosol test ports

Planning a Safe-Change Filter Housing specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する