Three-quarter view of compact stainless safe-change filter housing

공기 필터 및 화학 여과

안전 교체 필터 하우징

A compact containment housing with a protected service sleeve and mistake-resistant clamp for changing loaded filters without opening them to the room.

Protected Service Sleeve
Mistake-Resistant Clamping
Inspection Window
Compact Containment Module

견적 요청 제품 찾아보기

상품 소개

The safe-change housing integrates a flexible replacement barrier into a compact welded enclosure. A clear service window confirms that the filter and bag are present before the door is released, while the internal shaft cannot reach its locked position unless the filter is correctly seated. The housing can accept particulate or molecular cells and connect into a modular exhaust line. Its removable lightweight door and external operating handle reduce the number of actions carried out inside the barrier.

주요 기능

A protected service sleeve isolates the filter throughout the exchange sequence.

Mechanical poka-yoke geometry prevents clamping before the element is fully seated.

A viewing window permits filter-position checks without removing the access door.

Corner-connected modules build larger banks while maintaining a rigid sealing frame.

고객 제품 관심사

Contained change is only reliable when the filter, clamp, service barrier and access door are used in the correct sequence.

A technician begins service without confirming that the barrier bag is present.The inspection window provides an external view of the installed filter and change sleeve.

A partially seated filter is clamped and creates a hidden bypass path.The locating feature blocks the clamp from closing until the element reaches its sealing position.

A heavy access door is awkward to handle through protective equipment.A removable lightweight door reduces handling force around the service opening.

Adding a second filtration stage creates an unsealed field transition.Matched modular interfaces connect stages with a continuous compression gasket.

일반적인 응용 프로그램

Pharmaceutical potent-compound exhaustMicrobiology research suitesAnimal disease facilitiesHospital isolation ventilationChemical sampling enclosures

기술 매개변수

Typical construction ranges for a compact safe-change filter housing are shown below.

핵심 재료	Welded 304 stainless-steel enclosure with stainless internal filter rack and clamp shaft
패널 두께	1.2–2.5 mm enclosure panels
유효 폭	305–1220 mm for one- or two-filter-wide modules
최대 길이	Up to 2000 mm per assembled multi-stage section
강철 면면 두께	1.2–2.5 mm 304 stainless-steel casing and sealing frame
코어 밀도	Approximately 8000 kg/m³ for 304 stainless-steel structural parts
열전도도 (Thermal Conductivity)	Approximately 14.5–16.5 W/(m·K) for the compact 304 stainless module
표면 마무리	Cleaned brushed stainless steel with smooth continuous welds
접합 유형	Modular corner-bolted connection with continuous gasket, protected service collar and safety clamp
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Particulate or molecular filter sectionIntegrated viewing windowUpstream and downstream isolationPressure and aerosol test ports

Planning a Safe-Change Filter Housing specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.