Three-quarter view of compact stainless safe-change filter housing

Penapis udara dan penapisan kimia

Perumahan Penapis Selamat-Tukar

A compact containment housing with a protected service sleeve and mistake-resistant clamp for changing loaded filters without opening them to the room.

Protected Service Sleeve
Mistake-Resistant Clamping
Inspection Window
Compact Containment Module

Permintaan sebut harga Semak imbas produk

Pengenalan Produk

The safe-change housing integrates a flexible replacement barrier into a compact welded enclosure. A clear service window confirms that the filter and bag are present before the door is released, while the internal shaft cannot reach its locked position unless the filter is correctly seated. The housing can accept particulate or molecular cells and connect into a modular exhaust line. Its removable lightweight door and external operating handle reduce the number of actions carried out inside the barrier.

Ciri-ciri Utama

A protected service sleeve isolates the filter throughout the exchange sequence.

Mechanical poka-yoke geometry prevents clamping before the element is fully seated.

A viewing window permits filter-position checks without removing the access door.

Corner-connected modules build larger banks while maintaining a rigid sealing frame.

Kebimbangan Produk Pelanggan

Contained change is only reliable when the filter, clamp, service barrier and access door are used in the correct sequence.

A technician begins service without confirming that the barrier bag is present.The inspection window provides an external view of the installed filter and change sleeve.

A partially seated filter is clamped and creates a hidden bypass path.The locating feature blocks the clamp from closing until the element reaches its sealing position.

A heavy access door is awkward to handle through protective equipment.A removable lightweight door reduces handling force around the service opening.

Adding a second filtration stage creates an unsealed field transition.Matched modular interfaces connect stages with a continuous compression gasket.

Permohonan yang biasa

Pharmaceutical potent-compound exhaustMicrobiology research suitesAnimal disease facilitiesHospital isolation ventilationChemical sampling enclosures

Parameter teknikal

Typical construction ranges for a compact safe-change filter housing are shown below.

Bahan Teras	Welded 304 stainless-steel enclosure with stainless internal filter rack and clamp shaft
Ketebalan Panel	1.2–2.5 mm enclosure panels
Lebar berkesan	305–1220 mm for one- or two-filter-wide modules
Panjang maksimum	Up to 2000 mm per assembled multi-stage section
Keluli Menghadapi Ketebalan	1.2–2.5 mm 304 stainless-steel casing and sealing frame
Ketumpatan teras	Approximately 8000 kg/m³ for 304 stainless-steel structural parts
Kekonduksian Terma	Approximately 14.5–16.5 W/(m·K) for the compact 304 stainless module
Kemasan permukaan	Cleaned brushed stainless steel with smooth continuous welds
Jenis Bersatu	Modular corner-bolted connection with continuous gasket, protected service collar and safety clamp
Penyesuaian	Boleh didapati berdasarkan aplikasi yang dimaksudkan dan persekitaran operasi.

Pilihan yang boleh didapati

Particulate or molecular filter sectionIntegrated viewing windowUpstream and downstream isolationPressure and aerosol test ports

Planning a Safe-Change Filter Housing specification?

Hantarkan kepada kami dimensi anda, syarat pemasangan, sasaran prestasi dan kemasan permukaan yang diperlukan.

Berbincang dengan pasukan kami