English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
ملابس الغرف النظيفة، PPE والمواد الاستهلاكية
مسبقا المشبعة مناديل غرف الأبحاث
Low-lint cleanroom wipes pre-saturated with a controlled cleaning solution and supplied in a resealable center-pull dispenser for repeatable use.
- Controlled factory-applied solution improves wipe-to-wipe consistency
- Resealable dispensing format reduces open solvent handling
- Low-lint nonwoven substrate combines softness with dependable wet strength
مقدمة المنتج
Pre-Saturated Cleanroom Wipes pair a compatible nonwoven substrate with a measured blend of isopropyl alcohol and deionized water or another approved cleaning chemistry. Factory saturation reduces manual mixing and limits the amount of open solvent brought to the work area. A center-pull canister or resealable pouch protects the remaining wipes and supports single-sheet dispensing at the point of use.
الخصائص الرئيسية
Low-lint polyester or polyester-blend substrate retains wet strength
Center-pull dispensing reduces unnecessary contact with unused sheets
Resealable closure helps limit evaporation during the use period
Several IPA/DI-water ratios and substrate weights can be specified
مخاوف المنتج للعملاء
Manually wetting dry wipes can create inconsistent solvent loading, spills and excess vapor exposure. An opened dispenser must also keep the remaining wipes protected and suitably moist.
Operators may apply too much or too little solution to dry wipes.Use factory-metered saturation with defined solution loading per pack.
Open solvent bottles increase handling and spill risk.Select a closed center-pull canister or resealable pouch for point-of-use dispensing.
Poor seals can allow the pack to dry before all wipes are used.Match closure design and pack count to the expected consumption period.
An incompatible fabric may release fibers or soften in the selected chemistry.Verify substrate compatibility with the approved solvent or disinfectant blend.
تطبيقات نموذجية
Suitable for workstation wipe-down, glove cleaning, tool preparation, removal of light process residue and routine application of IPA/water blends in semiconductor, electronics, pharmaceutical and medical-device facilities.
المعلمات الفنية
The following ranges describe common pre-saturated cleanroom wipe formats. Final solvent blend, loading, wipe size and package configuration are selected for the user's surface, residue and ventilation conditions.
| المواد الأساسية | Hydroentangled polyester or polyester/rayon nonwoven wipe |
|---|---|
| سمك اللوحة | 0.30–0.60 mm |
| العرض الفعال | 100–230 mm |
| الحد الأقصى الطول | 300 mm |
| الصلب يواجه سمك | 0 mm; no steel facing used |
| الكثافة الأساسية | 40–120 kg/m³ apparent fabric density |
| الموصلية الحرارية | 0.04–0.08 W/(m·K), wet substrate dependent |
| إنهاء السطح | White pre-saturated wipe in a resealable HDPE dispenser |
| نوع المشترك | Hydroentangled cut edge with center-pull dispensing closure |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
IPA/DI-water blends in several concentrationsAlternative approved aqueous cleaning chemistryCenter-pull canister or resealable pouchPolyester or polyester-blend substrateFlat sheet or perforated rollSterile pre-saturated configuration
Planning a Pre-Saturated Cleanroom Wipes specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
