Three-quarter view of pre-saturated cleanroom wipes in a blue-lid canister

クリーンルーム衣料品、 PPE 、消耗品

前飽和クリーンルームワイプ

Low-lint cleanroom wipes pre-saturated with a controlled cleaning solution and supplied in a resealable center-pull dispenser for repeatable use.

Controlled factory-applied solution improves wipe-to-wipe consistency
Resealable dispensing format reduces open solvent handling
Low-lint nonwoven substrate combines softness with dependable wet strength

見積もりリクエスト製品案内

商品紹介

Pre-Saturated Cleanroom Wipes pair a compatible nonwoven substrate with a measured blend of isopropyl alcohol and deionized water or another approved cleaning chemistry. Factory saturation reduces manual mixing and limits the amount of open solvent brought to the work area. A center-pull canister or resealable pouch protects the remaining wipes and supports single-sheet dispensing at the point of use.

主要な特徴

Controlled solution loading supports repeatable wetness between wipes

Low-lint polyester or polyester-blend substrate retains wet strength

Center-pull dispensing reduces unnecessary contact with unused sheets

Resealable closure helps limit evaporation during the use period

Several IPA/DI-water ratios and substrate weights can be specified

お客様の製品に関する懸念事項

Manually wetting dry wipes can create inconsistent solvent loading, spills and excess vapor exposure. An opened dispenser must also keep the remaining wipes protected and suitably moist.

Operators may apply too much or too little solution to dry wipes.Use factory-metered saturation with defined solution loading per pack.

Open solvent bottles increase handling and spill risk.Select a closed center-pull canister or resealable pouch for point-of-use dispensing.

Poor seals can allow the pack to dry before all wipes are used.Match closure design and pack count to the expected consumption period.

An incompatible fabric may release fibers or soften in the selected chemistry.Verify substrate compatibility with the approved solvent or disinfectant blend.

典型的な用途

Suitable for workstation wipe-down, glove cleaning, tool preparation, removal of light process residue and routine application of IPA/water blends in semiconductor, electronics, pharmaceutical and medical-device facilities.

技術的なパラメータ

The following ranges describe common pre-saturated cleanroom wipe formats. Final solvent blend, loading, wipe size and package configuration are selected for the user's surface, residue and ventilation conditions.

コア材料	Hydroentangled polyester or polyester/rayon nonwoven wipe
パネルの厚さ	0.30–0.60 mm
有効幅	100–230 mm
最大長さ	300 mm
鋼鉄の厚さを直面する	0 mm; no steel facing used
コア密度	40–120 kg/m³ apparent fabric density
熱伝導率	0.04–0.08 W/(m·K), wet substrate dependent
表面仕上げ	White pre-saturated wipe in a resealable HDPE dispenser
ジョイントタイプ	Hydroentangled cut edge with center-pull dispensing closure
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

IPA/DI-water blends in several concentrationsAlternative approved aqueous cleaning chemistryCenter-pull canister or resealable pouchPolyester or polyester-blend substrateFlat sheet or perforated rollSterile pre-saturated configuration

Planning a Pre-Saturated Cleanroom Wipes specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する