English
Немецкий
Арабский язык
Французский
Индонезийский
Японский язык
Корейский
Японский
Португальский
Русский языкТекущий
Испанский язык
Тайский
Турецкий
Вьетнамский язык
Одежда для чистых комнат, ИПП и расходные материалы
Преднасыщенные полотенца для чистых помещений
Low-lint cleanroom wipes pre-saturated with a controlled cleaning solution and supplied in a resealable center-pull dispenser for repeatable use.
- Controlled factory-applied solution improves wipe-to-wipe consistency
- Resealable dispensing format reduces open solvent handling
- Low-lint nonwoven substrate combines softness with dependable wet strength
Введение продукции
Pre-Saturated Cleanroom Wipes pair a compatible nonwoven substrate with a measured blend of isopropyl alcohol and deionized water or another approved cleaning chemistry. Factory saturation reduces manual mixing and limits the amount of open solvent brought to the work area. A center-pull canister or resealable pouch protects the remaining wipes and supports single-sheet dispensing at the point of use.
Основные характеристики
Low-lint polyester or polyester-blend substrate retains wet strength
Center-pull dispensing reduces unnecessary contact with unused sheets
Resealable closure helps limit evaporation during the use period
Several IPA/DI-water ratios and substrate weights can be specified
Обеспокоенность клиентов продуктами
Manually wetting dry wipes can create inconsistent solvent loading, spills and excess vapor exposure. An opened dispenser must also keep the remaining wipes protected and suitably moist.
Operators may apply too much or too little solution to dry wipes.Use factory-metered saturation with defined solution loading per pack.
Open solvent bottles increase handling and spill risk.Select a closed center-pull canister or resealable pouch for point-of-use dispensing.
Poor seals can allow the pack to dry before all wipes are used.Match closure design and pack count to the expected consumption period.
An incompatible fabric may release fibers or soften in the selected chemistry.Verify substrate compatibility with the approved solvent or disinfectant blend.
Типичные приложения
Suitable for workstation wipe-down, glove cleaning, tool preparation, removal of light process residue and routine application of IPA/water blends in semiconductor, electronics, pharmaceutical and medical-device facilities.
Технические параметры
The following ranges describe common pre-saturated cleanroom wipe formats. Final solvent blend, loading, wipe size and package configuration are selected for the user's surface, residue and ventilation conditions.
| Основной материал | Hydroentangled polyester or polyester/rayon nonwoven wipe |
|---|---|
| Толщина панели | 0.30–0.60 mm |
| эффективная ширина | 100–230 mm |
| Максимальная длина | 300 mm |
| Толщина линий стали | 0 mm; no steel facing used |
| Плотность ядра | 40–120 kg/m³ apparent fabric density |
| Теплопроводимость | 0.04–0.08 W/(m·K), wet substrate dependent |
| Поверхностная отделка | White pre-saturated wipe in a resealable HDPE dispenser |
| Объединенный тип | Hydroentangled cut edge with center-pull dispensing closure |
| Customization | Доступно в зависимости от предполагаемого применения и операционной среды. |
Доступные варианты
IPA/DI-water blends in several concentrationsAlternative approved aqueous cleaning chemistryCenter-pull canister or resealable pouchPolyester or polyester-blend substrateFlat sheet or perforated rollSterile pre-saturated configuration
Planning a Pre-Saturated Cleanroom Wipes specification?
Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.
