Three-quarter view of pre-saturated cleanroom wipes in a blue-lid canister

클린룸 의류, PPE 및 소모품

Pre - Saturated Cleanroom Wipes (프레포화 클린룸 수건)

Low-lint cleanroom wipes pre-saturated with a controlled cleaning solution and supplied in a resealable center-pull dispenser for repeatable use.

Controlled factory-applied solution improves wipe-to-wipe consistency
Resealable dispensing format reduces open solvent handling
Low-lint nonwoven substrate combines softness with dependable wet strength

견적 요청 제품 찾아보기

상품 소개

Pre-Saturated Cleanroom Wipes pair a compatible nonwoven substrate with a measured blend of isopropyl alcohol and deionized water or another approved cleaning chemistry. Factory saturation reduces manual mixing and limits the amount of open solvent brought to the work area. A center-pull canister or resealable pouch protects the remaining wipes and supports single-sheet dispensing at the point of use.

주요 기능

Controlled solution loading supports repeatable wetness between wipes

Low-lint polyester or polyester-blend substrate retains wet strength

Center-pull dispensing reduces unnecessary contact with unused sheets

Resealable closure helps limit evaporation during the use period

Several IPA/DI-water ratios and substrate weights can be specified

고객 제품 관심사

Manually wetting dry wipes can create inconsistent solvent loading, spills and excess vapor exposure. An opened dispenser must also keep the remaining wipes protected and suitably moist.

Operators may apply too much or too little solution to dry wipes.Use factory-metered saturation with defined solution loading per pack.

Open solvent bottles increase handling and spill risk.Select a closed center-pull canister or resealable pouch for point-of-use dispensing.

Poor seals can allow the pack to dry before all wipes are used.Match closure design and pack count to the expected consumption period.

An incompatible fabric may release fibers or soften in the selected chemistry.Verify substrate compatibility with the approved solvent or disinfectant blend.

일반적인 응용 프로그램

Suitable for workstation wipe-down, glove cleaning, tool preparation, removal of light process residue and routine application of IPA/water blends in semiconductor, electronics, pharmaceutical and medical-device facilities.

기술 매개변수

The following ranges describe common pre-saturated cleanroom wipe formats. Final solvent blend, loading, wipe size and package configuration are selected for the user's surface, residue and ventilation conditions.

핵심 재료	Hydroentangled polyester or polyester/rayon nonwoven wipe
패널 두께	0.30–0.60 mm
유효 폭	100–230 mm
최대 길이	300 mm
강철 면면 두께	0 mm, 강철 면재 사용 없음
코어 밀도	40–120 kg/m³ apparent fabric density
열전도도 (Thermal Conductivity)	0.04–0.08 W/(m·K), wet substrate dependent
표면 마무리	White pre-saturated wipe in a resealable HDPE dispenser
접합 유형	Hydroentangled cut edge with center-pull dispensing closure
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

IPA/DI-water blends in several concentrationsAlternative approved aqueous cleaning chemistryCenter-pull canister or resealable pouchPolyester or polyester-blend substrateFlat sheet or perforated rollSterile pre-saturated configuration

Planning a Pre-Saturated Cleanroom Wipes specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.