Three-quarter view of pre-saturated cleanroom wipes in a blue-lid canister

Vêtements de salle blanche, EPI et consommables

Nettoyage de salle blanche pré - saturée

Low-lint cleanroom wipes pre-saturated with a controlled cleaning solution and supplied in a resealable center-pull dispenser for repeatable use.

Controlled factory-applied solution improves wipe-to-wipe consistency
Resealable dispensing format reduces open solvent handling
Low-lint nonwoven substrate combines softness with dependable wet strength

Demander un devis. Browse les produits

Introduction de produit

Pre-Saturated Cleanroom Wipes pair a compatible nonwoven substrate with a measured blend of isopropyl alcohol and deionized water or another approved cleaning chemistry. Factory saturation reduces manual mixing and limits the amount of open solvent brought to the work area. A center-pull canister or resealable pouch protects the remaining wipes and supports single-sheet dispensing at the point of use.

Key Features

Controlled solution loading supports repeatable wetness between wipes

Low-lint polyester or polyester-blend substrate retains wet strength

Center-pull dispensing reduces unnecessary contact with unused sheets

Resealable closure helps limit evaporation during the use period

Several IPA/DI-water ratios and substrate weights can be specified

Préoccupations du client produit

Manually wetting dry wipes can create inconsistent solvent loading, spills and excess vapor exposure. An opened dispenser must also keep the remaining wipes protected and suitably moist.

Operators may apply too much or too little solution to dry wipes.Use factory-metered saturation with defined solution loading per pack.

Open solvent bottles increase handling and spill risk.Select a closed center-pull canister or resealable pouch for point-of-use dispensing.

Poor seals can allow the pack to dry before all wipes are used.Match closure design and pack count to the expected consumption period.

An incompatible fabric may release fibers or soften in the selected chemistry.Verify substrate compatibility with the approved solvent or disinfectant blend.

Les applications typiques

Suitable for workstation wipe-down, glove cleaning, tool preparation, removal of light process residue and routine application of IPA/water blends in semiconductor, electronics, pharmaceutical and medical-device facilities.

Paramètres techniques

The following ranges describe common pre-saturated cleanroom wipe formats. Final solvent blend, loading, wipe size and package configuration are selected for the user's surface, residue and ventilation conditions.

Matériaux de base	Hydroentangled polyester or polyester/rayon nonwoven wipe
Panneau épaisseur	0.30–0.60 mm
Largeur effective	100–230 mm
Longueur maximale	300 mm
Acier face épaisseur	0 mm; no steel facing used
Densité Core	40–120 kg/m³ apparent fabric density
Conductivité thermique	0.04–0.08 W/(m·K), wet substrate dependent
surface finie	White pre-saturated wipe in a resealable HDPE dispenser
Type joint	Hydroentangled cut edge with center-pull dispensing closure
Customisation	Disponible en fonction de l'application prévue et de l'environnement d'exploitation.

Options disponibles

IPA/DI-water blends in several concentrationsAlternative approved aqueous cleaning chemistryCenter-pull canister or resealable pouchPolyester or polyester-blend substrateFlat sheet or perforated rollSterile pre-saturated configuration

Planning a Pre-Saturated Cleanroom Wipes specification?

Envoyez-nous vos dimensions, conditions d'installation, objectifs de performance et finition de surface requise.

Parlez à notre équipe