Three-quarter view of pre-saturated cleanroom wipes in a blue-lid canister

Temiz Oda Giysileri, PPE ve Tüketim Malzemeleri

Pre-Saturated Temiz Oda Havluları

Low-lint cleanroom wipes pre-saturated with a controlled cleaning solution and supplied in a resealable center-pull dispenser for repeatable use.

Controlled factory-applied solution improves wipe-to-wipe consistency
Resealable dispensing format reduces open solvent handling
Low-lint nonwoven substrate combines softness with dependable wet strength

Alıntı isteği Browse ürünleri

Ürün tanıtımı

Pre-Saturated Cleanroom Wipes pair a compatible nonwoven substrate with a measured blend of isopropyl alcohol and deionized water or another approved cleaning chemistry. Factory saturation reduces manual mixing and limits the amount of open solvent brought to the work area. A center-pull canister or resealable pouch protects the remaining wipes and supports single-sheet dispensing at the point of use.

Ana Özellikler

Controlled solution loading supports repeatable wetness between wipes

Low-lint polyester or polyester-blend substrate retains wet strength

Center-pull dispensing reduces unnecessary contact with unused sheets

Resealable closure helps limit evaporation during the use period

Several IPA/DI-water ratios and substrate weights can be specified

Müşteri Ürün Sorunları

Manually wetting dry wipes can create inconsistent solvent loading, spills and excess vapor exposure. An opened dispenser must also keep the remaining wipes protected and suitably moist.

Operators may apply too much or too little solution to dry wipes.Use factory-metered saturation with defined solution loading per pack.

Open solvent bottles increase handling and spill risk.Select a closed center-pull canister or resealable pouch for point-of-use dispensing.

Poor seals can allow the pack to dry before all wipes are used.Match closure design and pack count to the expected consumption period.

An incompatible fabric may release fibers or soften in the selected chemistry.Verify substrate compatibility with the approved solvent or disinfectant blend.

Tipik uygulamalar

Suitable for workstation wipe-down, glove cleaning, tool preparation, removal of light process residue and routine application of IPA/water blends in semiconductor, electronics, pharmaceutical and medical-device facilities.

Teknik parametreler

The following ranges describe common pre-saturated cleanroom wipe formats. Final solvent blend, loading, wipe size and package configuration are selected for the user's surface, residue and ventilation conditions.

Temel malzemeler	Hydroentangled polyester or polyester/rayon nonwoven wipe
Panel kalınlığı	0.30–0.60 mm
Effective Width (Etkili Genişlik)	100–230 mm
Maksimum uzunluk	300 mm
Çelik yüz yüze kalınlığı	0 mm; Çelik yüzü kullanılmaz
Core Density (Çekirdek Yoğunluğu)	40–120 kg/m³ apparent fabric density
Termal İletkenlik	0.04–0.08 W/(m·K), wet substrate dependent
Yüzey bitirme	White pre-saturated wipe in a resealable HDPE dispenser
Ortak tip	Hydroentangled cut edge with center-pull dispensing closure
Customization (Özelleşme)	Kullanılan uygulama ve çalışma ortamına göre kullanılabilir.

Mevcut Seçenekler

IPA/DI-water blends in several concentrationsAlternative approved aqueous cleaning chemistryCenter-pull canister or resealable pouchPolyester or polyester-blend substrateFlat sheet or perforated rollSterile pre-saturated configuration

Planning a Pre-Saturated Cleanroom Wipes specification?

Bize boyutlarınızı, montaj koşullarınızı, performans hedeflerinizi ve gerekli yüzey kaplamalarınızı gönderin.

Ekibimizle konuşun