Open restricted access barrier system surrounding an aseptic line

معدات التدفق والاحتواء الصفائحية

Open نظام الوصول المقيد الحاجز

A rigid open RABS that limits direct operator access to an aseptic line through transparent panels, glove ports and controlled HEPA-filtered downflow.

Rigid Operator Separation
HEPA-Filtered Critical Downflow
Glove-Assisted Interventions
Open RABS Cleanroom Interface

طلب عرض أسعار تصفح المنتجات

مقدمة المنتج

An open RABS surrounds the critical filling or handling zone with rigid transparent panels and glove-access doors while remaining dependent on the background cleanroom. Filtered unidirectional air protects open product locations, and operators perform routine interventions through fixed gloves instead of opening the barrier. The enclosure is not gas-tight and does not use a sealed pressure shell; planned door openings, setup and cleaning follow the surrounding cleanroom procedure.

الخصائص الرئيسية

Rigid glazed panels reduce direct operator contact with the critical line.

Glove ports support planned interventions without opening access doors.

HEPA-filtered downflow maintains first air over open containers and closures.

Hinged barrier doors provide controlled setup and maintenance access.

The modular frame integrates around existing filling equipment and conveyors.

مخاوف المنتج للعملاء

An open RABS reduces operator intervention but still relies on the surrounding cleanroom and disciplined door-opening control.

Operators reach directly over open sterile containers.Glove ports position routine interventions outside the open product path.

Barrier panels obstruct machine controls and jam points.Door, glove and control locations are mapped to actual intervention positions.

Users treat an open RABS like a sealed isolator.The open-system dependency on the background cleanroom is stated in operation and layout guidance.

Panel joints create ledges beside the conveyor.Flush framed glazing and sealed lower skirts reduce exposed horizontal edges.

تطبيقات نموذجية

Aseptic vial fillingOpen-container transferStopper feeding protectionSterile component handling in cleanrooms

المعلمات الفنية

Typical configurable construction ranges for an open restricted access barrier system are listed below.

المواد الأساسية	SUS304 or SUS316L modular frame with laminated safety-glass panels and CSM glove assemblies
سمك اللوحة	30-60 mm framed barrier and lower-skirt sections
العرض الفعال	1500-5000 mm protected line width
الحد الأقصى الطول	Up to 20000 mm modular barrier length
الصلب يواجه سمك	1.2-2.0 mm stainless lower skirts and service panels
الكثافة الأساسية	Approximately 2500 kg/m³ for laminated safety-glass barrier panels
الموصلية الحرارية	0.8-1.0 W/(m·K) for laminated safety glass
إنهاء السطح	Fine-brushed stainless frame with flush clear laminated glazing
نوع المشترك	Bolted modular barrier frame with gasketed glazing, hinged glove doors and sealed machine skirts
التخصيص	متوفر على أساس التطبيق المقصود وبيئة التشغيل.

الخيارات المتاحة

Active overhead HEPA supplyFixed or hinged glove panelsMachine and conveyor cut-outsEnvironmental monitoring ports

Planning a Open Restricted Access Barrier System specification?

أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.

تحدث مع فريقنا