Open restricted access barrier system surrounding an aseptic line

層流 · 封じ込め装置

Oopen 制限されたアクセス障壁システム

A rigid open RABS that limits direct operator access to an aseptic line through transparent panels, glove ports and controlled HEPA-filtered downflow.

Rigid Operator Separation
HEPA-Filtered Critical Downflow
Glove-Assisted Interventions
Open RABS Cleanroom Interface

見積もりリクエスト製品案内

商品紹介

An open RABS surrounds the critical filling or handling zone with rigid transparent panels and glove-access doors while remaining dependent on the background cleanroom. Filtered unidirectional air protects open product locations, and operators perform routine interventions through fixed gloves instead of opening the barrier. The enclosure is not gas-tight and does not use a sealed pressure shell; planned door openings, setup and cleaning follow the surrounding cleanroom procedure.

主要な特徴

Rigid glazed panels reduce direct operator contact with the critical line.

Glove ports support planned interventions without opening access doors.

HEPA-filtered downflow maintains first air over open containers and closures.

Hinged barrier doors provide controlled setup and maintenance access.

The modular frame integrates around existing filling equipment and conveyors.

お客様の製品に関する懸念事項

An open RABS reduces operator intervention but still relies on the surrounding cleanroom and disciplined door-opening control.

Operators reach directly over open sterile containers.Glove ports position routine interventions outside the open product path.

Barrier panels obstruct machine controls and jam points.Door, glove and control locations are mapped to actual intervention positions.

Users treat an open RABS like a sealed isolator.The open-system dependency on the background cleanroom is stated in operation and layout guidance.

Panel joints create ledges beside the conveyor.Flush framed glazing and sealed lower skirts reduce exposed horizontal edges.

典型的な用途

Aseptic vial fillingOpen-container transferStopper feeding protectionSterile component handling in cleanrooms

技術的なパラメータ

Typical configurable construction ranges for an open restricted access barrier system are listed below.

コア材料	SUS304 or SUS316L modular frame with laminated safety-glass panels and CSM glove assemblies
パネルの厚さ	30-60 mm framed barrier and lower-skirt sections
有効幅	1500-5000 mm protected line width
最大長さ	Up to 20000 mm modular barrier length
鋼鉄の厚さを直面する	1.2-2.0 mm stainless lower skirts and service panels
コア密度	Approximately 2500 kg/m³ for laminated safety-glass barrier panels
熱伝導率	0.8-1.0 W/(m·K) for laminated safety glass
表面仕上げ	Fine-brushed stainless frame with flush clear laminated glazing
ジョイントタイプ	Bolted modular barrier frame with gasketed glazing, hinged glove doors and sealed machine skirts
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

Active overhead HEPA supplyFixed or hinged glove panelsMachine and conveyor cut-outsEnvironmental monitoring ports

Planning a Open Restricted Access Barrier System specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する