Open restricted access barrier system surrounding an aseptic line

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

개방 제한 접근 장벽 시스템 (Open restricted access barrier system)

A rigid open RABS that limits direct operator access to an aseptic line through transparent panels, glove ports and controlled HEPA-filtered downflow.

Rigid Operator Separation
HEPA-Filtered Critical Downflow
Glove-Assisted Interventions
Open RABS Cleanroom Interface

견적 요청 제품 찾아보기

상품 소개

An open RABS surrounds the critical filling or handling zone with rigid transparent panels and glove-access doors while remaining dependent on the background cleanroom. Filtered unidirectional air protects open product locations, and operators perform routine interventions through fixed gloves instead of opening the barrier. The enclosure is not gas-tight and does not use a sealed pressure shell; planned door openings, setup and cleaning follow the surrounding cleanroom procedure.

주요 기능

Rigid glazed panels reduce direct operator contact with the critical line.

Glove ports support planned interventions without opening access doors.

HEPA-filtered downflow maintains first air over open containers and closures.

Hinged barrier doors provide controlled setup and maintenance access.

The modular frame integrates around existing filling equipment and conveyors.

고객 제품 관심사

An open RABS reduces operator intervention but still relies on the surrounding cleanroom and disciplined door-opening control.

Operators reach directly over open sterile containers.Glove ports position routine interventions outside the open product path.

Barrier panels obstruct machine controls and jam points.Door, glove and control locations are mapped to actual intervention positions.

Users treat an open RABS like a sealed isolator.The open-system dependency on the background cleanroom is stated in operation and layout guidance.

Panel joints create ledges beside the conveyor.Flush framed glazing and sealed lower skirts reduce exposed horizontal edges.

일반적인 응용 프로그램

Aseptic vial fillingOpen-container transferStopper feeding protectionSterile component handling in cleanrooms

기술 매개변수

Typical configurable construction ranges for an open restricted access barrier system are listed below.

핵심 재료	SUS304 or SUS316L modular frame with laminated safety-glass panels and CSM glove assemblies
패널 두께	30-60 mm framed barrier and lower-skirt sections
유효 폭	1500-5000 mm protected line width
최대 길이	Up to 20000 mm modular barrier length
강철 면면 두께	1.2-2.0 mm stainless lower skirts and service panels
코어 밀도	Approximately 2500 kg/m³ for laminated safety-glass barrier panels
열전도도 (Thermal Conductivity)	0.8-1.0 W/(m·K) for laminated safety glass
표면 마무리	Fine-brushed stainless frame with flush clear laminated glazing
접합 유형	Bolted modular barrier frame with gasketed glazing, hinged glove doors and sealed machine skirts
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

Active overhead HEPA supplyFixed or hinged glove panelsMachine and conveyor cut-outsEnvironmental monitoring ports

Planning a Open Restricted Access Barrier System specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.