English
الألمانية
العربيةالحالي
الفرنسية
الإندونيسية
اليابانية
الكورية
اللغة الملاوية
البرتغالية
الروسية
الإسبانية
التايلاندية
اللغة التركية
اللغة الفيتنامية
معدات التدفق والاحتواء الصفائحية
الأفقي تدفق رقمي نظيفة مقعد
A rear-filtered workstation that sweeps clean air horizontally across non-hazardous products toward the open front without a top filter section over the work.
- Full-Height Rear Filter
- Forward Horizontal Airflow
- Open Front Access
- Low Overhead Profile
مقدمة المنتج
A full-height rear filter forms the working back wall of this clean bench. Filtered air travels in a horizontal path across the stainless worktop and leaves through the open front, giving small parts and low-profile assemblies a direct first-air path. The open ceiling improves access to microscopes and fixtures, while the deeper cabinet body houses the rear fan and plenum. Because airflow moves toward the operator, the bench is reserved for non-hazardous work where product cleanliness is the objective.
الخصائص الرئيسية
An open upper work zone accommodates tall optical stands and assembly fixtures.
A rigid rear plenum keeps the filter face evenly supplied across its height.
Rounded worktop edges reduce turbulence at the front discharge boundary.
Front-access controls and a visible pressure indicator simplify daily checks.
مخاوف المنتج للعملاء
Horizontal flow is effective only when equipment placement preserves the direct air path from the rear filter to the open front.
Large objects block clean air to items positioned in front of them.The deep worktop allows fixtures to be arranged in a single layer close to the rear filter.
A top-mounted filter interferes with tall optical equipment.The rear fan-filter arrangement leaves the upper work zone unobstructed.
Sharp front edges disturb the outgoing air sheet.A radiused stainless worktop lip supports a smoother discharge path.
Hazardous samples could be directed toward the user.Clear use labeling restricts the bench to non-hazardous product-protection tasks.
تطبيقات نموذجية
Electronics assemblyOptical alignmentNon-hazardous sample preparationParticle-sensitive component packaging
المعلمات الفنية
Typical configurable construction ranges for a horizontal laminar flow clean bench are listed below.
| المواد الأساسية | SUS304 worktop with a powder-coated steel rear plenum and mineral-wool acoustic infill |
|---|---|
| سمك اللوحة | 30-50 mm rear and side plenum sections |
| العرض الفعال | 900-1800 mm clear working width |
| الحد الأقصى الطول | Up to 1200 mm overall cabinet depth |
| الصلب يواجه سمك | 0.9-1.2 mm powder-coated steel; 1.0-1.5 mm SUS304 worktop |
| الكثافة الأساسية | 80-120 kg/m³ acoustic mineral-wool infill |
| الموصلية الحرارية | 0.035-0.045 W / (m·K) لملء الصوتية |
| إنهاء السطح | White powder-coated exterior with brushed SUS304 horizontal worktop |
| نوع المشترك | Welded rear plenum with a gasketed full-height filter frame and radiused worktop edge |
| التخصيص | متوفر على أساس التطبيق المقصود وبيئة التشغيل. |
الخيارات المتاحة
HEPA or ULPA filter wallTabletop or freestanding baseStatic-dissipative work surfaceTask lighting and service outlets
Planning a Horizontal Laminar Flow Clean Bench specification?
أرسل لنا الأبعاد الخاصة بك، شروط التثبيت، أهداف الأداء والتشطيب السطحي المطلوب.
