Three-quarter view of a horizontal laminar flow clean bench with rear filter wall

Оборудование для ламинарного потока и ограничения

Горизонтальная ламинарная стола для очистки

A rear-filtered workstation that sweeps clean air horizontally across non-hazardous products toward the open front without a top filter section over the work.

Full-Height Rear Filter
Forward Horizontal Airflow
Open Front Access
Low Overhead Profile

Запрос котировки Просмотреть продукты

Введение продукции

A full-height rear filter forms the working back wall of this clean bench. Filtered air travels in a horizontal path across the stainless worktop and leaves through the open front, giving small parts and low-profile assemblies a direct first-air path. The open ceiling improves access to microscopes and fixtures, while the deeper cabinet body houses the rear fan and plenum. Because airflow moves toward the operator, the bench is reserved for non-hazardous work where product cleanliness is the objective.

Основные характеристики

The rear filter wall delivers first air directly across parts positioned near the back of the worktop.

An open upper work zone accommodates tall optical stands and assembly fixtures.

A rigid rear plenum keeps the filter face evenly supplied across its height.

Rounded worktop edges reduce turbulence at the front discharge boundary.

Front-access controls and a visible pressure indicator simplify daily checks.

Обеспокоенность клиентов продуктами

Horizontal flow is effective only when equipment placement preserves the direct air path from the rear filter to the open front.

Large objects block clean air to items positioned in front of them.The deep worktop allows fixtures to be arranged in a single layer close to the rear filter.

A top-mounted filter interferes with tall optical equipment.The rear fan-filter arrangement leaves the upper work zone unobstructed.

Sharp front edges disturb the outgoing air sheet.A radiused stainless worktop lip supports a smoother discharge path.

Hazardous samples could be directed toward the user.Clear use labeling restricts the bench to non-hazardous product-protection tasks.

Типичные приложения

Electronics assemblyOptical alignmentNon-hazardous sample preparationParticle-sensitive component packaging

Технические параметры

Typical configurable construction ranges for a horizontal laminar flow clean bench are listed below.

Основной материал	SUS304 worktop with a powder-coated steel rear plenum and mineral-wool acoustic infill
Толщина панели	30-50 mm rear and side plenum sections
эффективная ширина	900-1800 mm clear working width
Максимальная длина	Up to 1200 mm overall cabinet depth
Толщина линий стали	0.9-1.2 mm powder-coated steel; 1.0-1.5 mm SUS304 worktop
Плотность ядра	80-120 kg/m³ acoustic mineral-wool infill
Теплопроводимость	0.035-0.045 W/(m·K) for the acoustic infill
Поверхностная отделка	White powder-coated exterior with brushed SUS304 horizontal worktop
Объединенный тип	Welded rear plenum with a gasketed full-height filter frame and radiused worktop edge
Customization	Доступно в зависимости от предполагаемого применения и операционной среды.

Доступные варианты

HEPA or ULPA filter wallTabletop or freestanding baseStatic-dissipative work surfaceTask lighting and service outlets

Planning a Horizontal Laminar Flow Clean Bench specification?

Отправьте нам ваши габариты, условия монтажа, целевые показатели производительности и требуемую отделку поверхности.

Поговорите с нашей командой