Three-quarter view of a horizontal laminar flow clean bench with rear filter wall

Laminar Flow and Containment Equipment 에 대한 리뷰 보기

수평 층층 흐름 클린 벤치

A rear-filtered workstation that sweeps clean air horizontally across non-hazardous products toward the open front without a top filter section over the work.

Full-Height Rear Filter
Forward Horizontal Airflow
Open Front Access
Low Overhead Profile

견적 요청 제품 찾아보기

상품 소개

A full-height rear filter forms the working back wall of this clean bench. Filtered air travels in a horizontal path across the stainless worktop and leaves through the open front, giving small parts and low-profile assemblies a direct first-air path. The open ceiling improves access to microscopes and fixtures, while the deeper cabinet body houses the rear fan and plenum. Because airflow moves toward the operator, the bench is reserved for non-hazardous work where product cleanliness is the objective.

주요 기능

The rear filter wall delivers first air directly across parts positioned near the back of the worktop.

An open upper work zone accommodates tall optical stands and assembly fixtures.

A rigid rear plenum keeps the filter face evenly supplied across its height.

Rounded worktop edges reduce turbulence at the front discharge boundary.

Front-access controls and a visible pressure indicator simplify daily checks.

고객 제품 관심사

Horizontal flow is effective only when equipment placement preserves the direct air path from the rear filter to the open front.

Large objects block clean air to items positioned in front of them.The deep worktop allows fixtures to be arranged in a single layer close to the rear filter.

A top-mounted filter interferes with tall optical equipment.The rear fan-filter arrangement leaves the upper work zone unobstructed.

Sharp front edges disturb the outgoing air sheet.A radiused stainless worktop lip supports a smoother discharge path.

Hazardous samples could be directed toward the user.Clear use labeling restricts the bench to non-hazardous product-protection tasks.

일반적인 응용 프로그램

Electronics assemblyOptical alignmentNon-hazardous sample preparationParticle-sensitive component packaging

기술 매개변수

Typical configurable construction ranges for a horizontal laminar flow clean bench are listed below.

핵심 재료	SUS304 worktop with a powder-coated steel rear plenum and mineral-wool acoustic infill
패널 두께	30-50 mm rear and side plenum sections
유효 폭	900 - 1800 mm 명확한 작업 폭
최대 길이	Up to 1200 mm overall cabinet depth
강철 면면 두께	0.9-1.2 mm powder-coated steel; 1.0-1.5 mm SUS304 worktop
코어 밀도	80-120 kg/m³ acoustic mineral-wool infill
열전도도 (Thermal Conductivity)	0. 035 - 0. 045 W / (m · K) 음향 채우기
표면 마무리	White powder-coated exterior with brushed SUS304 horizontal worktop
접합 유형	Welded rear plenum with a gasketed full-height filter frame and radiused worktop edge
사용자 정의	의도된 응용 프로그램 및 운영 환경에 따라 사용할 수 있습니다.

사용 가능한 옵션

HEPA or ULPA filter wallTabletop or freestanding baseStatic-dissipative work surfaceTask lighting and service outlets

Planning a Horizontal Laminar Flow Clean Bench specification?

치수, 설치 조건, 성능 목표 및 필요한 표면 마감을 보내십시오.

우리 팀과 대화하십시오.