Aliran Laminar dan Peralatan Penahanan

Horizontal Laminar Flow Clean Bench

A rear-filtered workstation that sweeps clean air horizontally across non-hazardous products toward the open front without a top filter section over the work.

Full-Height Rear Filter
Forward Horizontal Airflow
Open Front Access
Low Overhead Profile

Permintaan untuk kutipan Browse Produk

Perkenalan produk

A full-height rear filter forms the working back wall of this clean bench. Filtered air travels in a horizontal path across the stainless worktop and leaves through the open front, giving small parts and low-profile assemblies a direct first-air path. The open ceiling improves access to microscopes and fixtures, while the deeper cabinet body houses the rear fan and plenum. Because airflow moves toward the operator, the bench is reserved for non-hazardous work where product cleanliness is the objective.

Fitur utama:

The rear filter wall delivers first air directly across parts positioned near the back of the worktop.

An open upper work zone accommodates tall optical stands and assembly fixtures.

A rigid rear plenum keeps the filter face evenly supplied across its height.

Rounded worktop edges reduce turbulence at the front discharge boundary.

Front-access controls and a visible pressure indicator simplify daily checks.

Kekhawatiran produk pelanggan

Horizontal flow is effective only when equipment placement preserves the direct air path from the rear filter to the open front.

Large objects block clean air to items positioned in front of them.The deep worktop allows fixtures to be arranged in a single layer close to the rear filter.

A top-mounted filter interferes with tall optical equipment.The rear fan-filter arrangement leaves the upper work zone unobstructed.

Sharp front edges disturb the outgoing air sheet.A radiused stainless worktop lip supports a smoother discharge path.

Hazardous samples could be directed toward the user.Clear use labeling restricts the bench to non-hazardous product-protection tasks.

Aplikasi yang Tipis

Electronics assemblyOptical alignmentNon-hazardous sample preparationParticle-sensitive component packaging

Parameter teknis

Typical configurable construction ranges for a horizontal laminar flow clean bench are listed below.

Bahan inti	SUS304 worktop with a powder-coated steel rear plenum and mineral-wool acoustic infill
Ketebalan Panel (Panel Thickness)	30-50 mm rear and side plenum sections
Efektif lebar	900 - 1800 mm lebar kerja yang jelas
Panjang maksimum	Up to 1200 mm overall cabinet depth
Baja menghadap ketebalan	0.9-1.2 mm powder-coated steel; 1.0-1.5 mm SUS304 worktop
Kepadatan inti (core density)	80-120 kg/m³ acoustic mineral-wool infill
Konduktivitas Termal (Thermal Conductivity)	0,035 - 0,045 W / (m · K) untuk infill akustik
Permukaan selesai	White powder-coated exterior with brushed SUS304 horizontal worktop
Jenis Bersama	Welded rear plenum with a gasketed full-height filter frame and radiused worktop edge
Customization (Kustomisasi)	Tersedia berdasarkan aplikasi yang dimaksudkan dan lingkungan operasi.

Pilihan yang tersedia

HEPA or ULPA filter wallTabletop or freestanding baseStatic-dissipative work surfaceTask lighting and service outlets

Planning a Horizontal Laminar Flow Clean Bench specification?

Kirimkan kami dimensi Anda, kondisi instalasi, target kinerja dan permukaan akhir yang diperlukan.

Bicaralah dengan tim kami