Three-quarter view of a horizontal laminar flow clean bench with rear filter wall

層流 · 封じ込め装置

横の層流クリーンベンチ

A rear-filtered workstation that sweeps clean air horizontally across non-hazardous products toward the open front without a top filter section over the work.

Full-Height Rear Filter
Forward Horizontal Airflow
Open Front Access
Low Overhead Profile

見積もりリクエスト製品案内

商品紹介

A full-height rear filter forms the working back wall of this clean bench. Filtered air travels in a horizontal path across the stainless worktop and leaves through the open front, giving small parts and low-profile assemblies a direct first-air path. The open ceiling improves access to microscopes and fixtures, while the deeper cabinet body houses the rear fan and plenum. Because airflow moves toward the operator, the bench is reserved for non-hazardous work where product cleanliness is the objective.

主要な特徴

The rear filter wall delivers first air directly across parts positioned near the back of the worktop.

An open upper work zone accommodates tall optical stands and assembly fixtures.

A rigid rear plenum keeps the filter face evenly supplied across its height.

Rounded worktop edges reduce turbulence at the front discharge boundary.

Front-access controls and a visible pressure indicator simplify daily checks.

お客様の製品に関する懸念事項

Horizontal flow is effective only when equipment placement preserves the direct air path from the rear filter to the open front.

Large objects block clean air to items positioned in front of them.The deep worktop allows fixtures to be arranged in a single layer close to the rear filter.

A top-mounted filter interferes with tall optical equipment.The rear fan-filter arrangement leaves the upper work zone unobstructed.

Sharp front edges disturb the outgoing air sheet.A radiused stainless worktop lip supports a smoother discharge path.

Hazardous samples could be directed toward the user.Clear use labeling restricts the bench to non-hazardous product-protection tasks.

典型的な用途

Electronics assemblyOptical alignmentNon-hazardous sample preparationParticle-sensitive component packaging

技術的なパラメータ

Typical configurable construction ranges for a horizontal laminar flow clean bench are listed below.

コア材料	SUS304 worktop with a powder-coated steel rear plenum and mineral-wool acoustic infill
パネルの厚さ	30-50 mm rear and side plenum sections
有効幅	900 — 1800 mm 明確な作業幅
最大長さ	Up to 1200 mm overall cabinet depth
鋼鉄の厚さを直面する	0.9-1.2 mm powder-coated steel; 1.0-1.5 mm SUS304 worktop
コア密度	80-120 kg/m³ acoustic mineral-wool infill
熱伝導率	0.035 — 0.045 W / （m · K）音響インフィルのための
表面仕上げ	White powder-coated exterior with brushed SUS304 horizontal worktop
ジョイントタイプ	Welded rear plenum with a gasketed full-height filter frame and radiused worktop edge
カスタマイズ	意図したアプリケーションと動作環境に基づいて利用できます。

利用可能なオプション

HEPA or ULPA filter wallTabletop or freestanding baseStatic-dissipative work surfaceTask lighting and service outlets

Planning a Horizontal Laminar Flow Clean Bench specification?

寸法、設置条件、性能目標、必要な表面仕上げをお送りください。

チームに相談する